Machine-, DIN- & Norm parts

E+G Magnets

E+G Magnets

Magnets from Elesa-Ganter. Several all types: Disc-, pot-, bar-, and U-magnets also in stainless steel. Magnetic adhesive force up to 1300N

E+G GN 50.1 w/o Thread

E+G GN 50.1 w/o Thread

Elesa+Ganter GN 50.1 Magnet disc shaped, without thread Materials of the magnet:- Hard ferrite HF, temperature resistant up to 200° C - Samarium, cobalt SmCo SC, temperature resistant up to 200° C - Neodymium, iron, boron NdFeB ND, temperature resistant up to 80° C Retaining magnets GN 50.1 are a shielded magnetic system. Fixed in place by gluing or side-mounted thrust bolt (e.g. GN 913.2 grub screw with pointed nose).

E+G GN 50.2 Threaded bush

E+G GN 50.2 Threaded bush

Elesa+Ganter GN 50.2 magnet, disc shaped, with female thread Materials:- Hard ferrite HF, temperature resistant up to 200° C - Samarium, cobalt SmCo SC, temperature resistant up to 200° C - Neodymium, iron, boron NdFeB ND, temperature resistant up to 80° C Retaining magnets GN 50.2 are a shielded magnetic system.

E+G GN 50.25 STAINLESS

E+G GN 50.25 STAINLESS

Elesa+Ganter GN 50.25 magnet, disc shaped, with female thread Housing / threaded bush, stainless steel Material of the magnet: - Hard ferrite HF, temperature resistant up to 220° C Stainless Steel-Retaining magnets GN 50.25 are a shielded magnetic system. Owing to the lower magnetic conductivity of the stainless steel housing, the adhesive forces are lower than in steel.

E+G GN 50.3 w/Threaded Stud

E+G GN 50.3 w/Threaded Stud

Elesa+Ganter GN 50.3 Disc-shaped, with treaded studMaterials of the magnet: - Hard ferrite HF, temperature resistant up to 200° C - Neodymium, iron, boron NdFeB ND, temperature resistant up to 80° C Retaining magnets GN 50.3 are a shielded magnetic system.

E+G GN 50.4 w/Bore

E+G GN 50.4 w/Bore

Elesa+Ganter GN 50.4 magnet, disc shaped, with bore / female thread Housing Steel, zinc plated Material of the magnet: - Version HF: Hard ferrite, temperature resistant up to 200° C. Retaining magnets GN 50.4 are a shielded magnetic system. To ensure that the magnetic properties (adhesive forces) are not impaired, the fixing screws of the types for countersunk screws and socket cap screws must be made of non-magnetic material (magnetic not conductive).

E+G GN 50.45 STAINLESS

E+G GN 50.45 STAINLESS

Elesa+Ganter GN 50.45 magnet, disc-shaped, with bore Housing Stainless steel Material of the magnet: - Version HF: Hard ferrite, temperature resistant up to 220 °C. Stainless Steel-Retaining magnets GN 50.45 are a shielded magnetic system. Owing to the lower magnetic conductivity ot the stainless steel housing, the adhesive forces are lower than in steel. To ensure that the magnetic properties (adhesive forces) are not impaired, the fixing screws must be made of non-magnetic material.

E+G GN 50.5 w/female thread

E+G GN 50.5 w/female thread

E+G GN 51.2 Threaded Bore

E+G GN 51.2 Threaded Bore

Elesa+Ganter GN 51.2 magnet, disc-shaped, with female thread, with rubber jacket. Steel part, zinc plated Rubber jacket Elastomer (TPE), 73 shore, black Material of the magnet: Neodymium, iron, boron NdFeB ND, temperature resistant up to 80° Retaining magnets GN 51.2 are a shielded magnetic system with rubber jacket. The rubber jacket protects sensitive surfaces from being damaged by the magnet and also delivers a higher friction coefficient, resulting in high lateral adhesion forces.SW: Black� ....

E+G GN 51.3 w/Threaded Stud

E+G GN 51.3 w/Threaded Stud

Elesa+Ganter GN 51.3 magnet, disc-shaped, with threaded stud, with rubber jacket Steel part, zinc plated Rubber jacket Elastomer (TPE), 73 shore, black Material of the magnet: Neodymium, iron, boron NdFeB ND, temperature resistant up to 80° C Retaining magnets GN 51.3 are a shielded magnetic system with rubber jacket. The rubber jacket protects sensitive surfaces from being damaged by the magnet and also delivers a higher friction coefficient, resulting in high lateral adhesion forces.

E+G GN 51.4 w Bore

E+G GN 51.4 w Bore

Elesa+Ganter GN 51.4 magnet, disc-shaped, with bore, with rubber jacket Steel part, zinc-plated Rubber jacket, Elastomer (TPE), 73 shore, black Material of the magnet: Neodymium, iron, boron NdFeB ND, temperature resistant up to 80°C Retaining magnets GN 51.4 are a shielded magnetic system with rubber jacket. The rubber jacket protects sensitive surfaces from being damaged by the magnet and also delivers a higher friction coefficient, resulting in high lateral adhesion forces.

E+G GN 51.5 Female Thread

E+G GN 51.5 Female Thread

Elesa+Ganter GN 51.5 magnet, disc-shaped, with female thread, with rubber jacket Steel part, zinc-plated Rubber jacket, Elastomer (TPE), 73 shore, black Material of the magnet: Neodymium, iron, boron NdFeB ND, temperature resistant up to 80°C Retaining magnets GN 51.7 are a shielded magnetic system with rubber jacket. The rubber jacket protects sensitive surfaces from being damaged by the magnet and also delivers a higher friction coefficient, resulting in high lateral adhesion forces.

E+G GN 51.6

Elesa+Ganter GN 51.6 magnet, disc-shaped, with two female threads, with rubber jacket Steel part, zinc-plated Rubber jacket, Elastomer (TPE), 73 shore, black Material of the magnet: Neodymium, iron, boron NdFeB ND, temperature resistant up to 80°C Retaining magnets GN 51.6 are a shielded magnetic system with rubber jacket.

E+G GN 51.8 Retaining magnets

E+G GN 51.8 Retaining magnets

Elesa+Ganter GN 51.8 retaining magnet with rubber jacket form a system together with the steel part that shields and strengthens the magnet, optimally concentrating the magnetic flux on the rubberized magnetic surface. The rubber protects sensitive surfaces from being damaged by the magnet and also delivers a high friction coefficient, resulting in high lateral displacement forces.Material:- Steel part in zinc plated steel- Magnet in NdFeB ND, Neodymium, iron, boron, temperature resistant up to ....

E+G GN 51.9 Retaining magnets

E+G GN 51.9 Retaining magnets

Elesa+Ganter GN 51.9 retaining magnets.The retaining magnets GN 51.9 with rubber jacket form a system together with the steel part that shields and strengthens the magnet, optimally concentrating the magnetic flux on the rubberized magnetic surface. Lines and hoses that must be frequently repositioned or removed entirely for maintenance or cleaning can be easily and securely fastened to the cable holder with cable ties. The rubber protects sensitive surfaces from being damaged by the magnet and ....

E+G GN 52.1 w/o Bore

E+G GN 52.1 w/o Bore

Elesa+Ganter GN 52.1 magnet, rod-shaped, smooth finish Housing, steel Identification no. 1: zinc plated, tolerance d = +0.2/-0.2 Identification no. 2: blank, tolerance d = h6 Materials of the magnet: - Aluminium, nickel, cobalt AINiCo AN, temperature resistant up to 450°C - Neodynium, iron, boron NdFeB ND, temperature resistant up to 80°C Retaining magnets GN 52.1 are a shielded magnetic system. Attachment options include pressing in, shrinking in or gluing in.

E+G GN 52.2 Female Thread

E+G GN 52.2 Female Thread

Elesa+Ganter GN 52.2 magnet, rod-shaped, with female thread Housing, steel, zinc plated Materials of the magnet:- Aluminium, nickel, cobalt AINiCo AN, temperature resistant up to 450°C - Neodymium, iron, boron NdFeB ND, temperature resistant up to 80°C Retaining magnets GN 52.2 are a shielded magnetic system.

E+G GN 52.3 Female Thread

E+G GN 52.3 Female Thread

Elesa+Ganter GN 52.3 magnet, rod-shaped, with female threadHousing steelMaterial of the magnet: Aluminium, nickel, cobalt AINiCo AN, temperature resistant up to 450°CRed Lacquering, temperature resistant up to 180°CZinc Plating, temperature resistant up to 200°CRetaining magnets GN 52.3 are a shielded magnetic system. For easier handling and/or to avoid demagnetisation, these magnets have an iron plate on their adhesive surface.

E+G GN 52.4 w/stud

E+G GN 52.4 w/stud

Elesa+Ganter GN 52.4 magnet, rod-shaped, with stud Housing, steel, zinc plated Type D with smooth stud Type E with threaded stud Materials of the magnet:- Aluminium, nickel, cobalt AINiCo AN, temperature resistant up to 450°C - Neodynium, iron, boron NdFeB ND, temperature resistant up to 80°C Retaining magnets GN 52.4 are a shielded magnetic system.

E+G GN 52.5 w/thread

E+G GN 52.5 w/thread

Elesa+Ganter GN 52.5 MagnetRod-shaped, with gummed adhesive surface.Housing Stainless steel.Rubber, Elastomer (TPE), 80 Shore A ≈, black.Material of the magnetNeodymium, iron, boron NdFeB ND, temperature resistant up to 80°C.Retaining magnets GN 52.5 are a shielded magnetic system with gummed adhesive surface.They are preferably used for sensitive surfaces. Also, the coefficient of friction is increased, with the effect that high lateralretaining forces are achieved.

E+G GN 53.1

Elesa+Ganter GN 53.1 magnet with plastic housing.Housing plastic: - RAL 9003 white WS colour. - RAL 7040 grey GR colour. - RAL 3031 red RT colour. Materials of the magnet: Neodymium, iron, boron NdFeB ND, temperature resistant up to 80° C Special executions on request. Magnets with custom imprint. Magnets GN 53.1 are primarily used for holding drawings and the like.

E+G GN 53.2 Magnet

E+G GN 53.2 Magnet

E+G GN 53.2 Magnets - Rectangular-Shape, with Plastic HousingThe magnets work in combination with the flat, rectangular plastic housing as a system for holding documents, templates, drawings etc. that are used in technical environments.The neodymium magnets used are characterized by a high retaining force.Choose between four colours:- White, RAL 9003 WS- Gray, RAL 7040 GR- Black, RAL 9004 SW- Red, RAL 3031 RTSpecification:- Housing in plastic- Magnet material: NdFeB ND, Neodymium, iron, boronTem ....

E+G GN 53.3 Magnet

E+G GN 53.3 Magnet

E+G GN 53.3 Disk-shaped magnets with handle and plastic housingMagnets GN 53.3 work in combination with the ergonomic plastic handle as a system for holding documents, templates, drawings etc. that are used in technical environments.The neodymium magnet keeps the required contact diameter small while also supplying a high retaining force.Type B with eyelet also offers the ability to protect the magnet from being lost with a retaining cable.Types:- Type A: Without eyelet- Type B: With eyeletColor ....

E+G GN 53.4 Magnet

E+G GN 53.4 Magnet

E+G GN 53.4 Disk-shaped magnet, with handleMagnets GN 53.4 work in combination with the ergonomic nickel-plated steel handle as a system for holding documents, templates, drawings etc. that are used in technical environments.The neodymium magnet keeps the required contact diameter small while also supplying a high retaining force.Type B also features a rubber underlay to protect sensitive surfaces from damage and ensure low noise on contact.Types:- Type A: Without rubber underlay- Type B: With r ....

E+G GN 54.1 Sandwich Magnet

E+G GN 54.1 Sandwich Magnet

Elesa+Ganter GN 54.1 magnet, rod-shaped, smooth finish Housing, brass Materials of the magnet:- Samarium, cobalt SmCo SC, temperature resistant up to 200°C - Neodymium, iron, boron NdFeB ND, temperature resistant up to 80°C Identification of ND: blue inked adhesive surface Features and applications. Retaining magnets GN 54.1 are a shielded magnetic system.

E+G GN 54.2 Retaining magnets

E+G GN 54.2 Retaining magnets

Elesa+Ganter GN 54.2 retaining magnets.Retaining magnets GN 54.2 are combined with a brass housing, the iron poles and the plastic insulation into a system that shields and considerably strengthens the magnet for optimal transmission of the magnetic flux onto the magnetic surface. This special design is also known by the name “sandwich magnet” or “pole shoe magnet”.Mounting these retaining magnets directly in steel components will create a magnetic shortcircuit which reduces the retainin ....

E+G GN 55.1

Elesa+Ganter GN 55.1 Raw magnetsMaterials of the magnet- Samarium, cobalt SmCo SC, temperature resistant up to 200° C.- Neodymium, iron, boron NdFeB ND, temperature resistant up to 80° C.

E+G GN 55.2

Elesa+Ganter GN 55.2 Raw magnetsMaterials of the magnet- Samarium, cobalt SmCo SC, temperature resistant up to 200° C.- Neodymium, iron, boron NdFeB ND, temperature resistant up to 80° C.

E+G GN 55.3

Elesa+Ganter GN 55.3 Raw magnetsMaterials of the magnetAluminium, nickel, cobalt AlNiCo AN.

E+G GN 55.4

Elesa+Ganter GN 55.4 Raw magnetsMaterials of the magnet- Samarium, cobalt SmCo SC, temperature resistant up to 200° C.- Neodymium, iron, boron NdFeB ND, temperature resistant up to 80° C.

E+G GN 56 Retaining magnets

E+G GN 56 Retaining magnets

Elesa+Ganter GN 56 Retaining magnetsTo be placed on alu profiles and mounted with grub screw. Can be mounted and demounted whenever needed.Material: Plastic, Technopolymer (Polyamid PA), black, matt SW Material of the magnet: NdFeB, Neodymium, iron, boron Steel insert, grub screw: zinc plated, blue passivatedTemperature resistant up to 80 °C

E+G GN 57.1 Retaining magnets

E+G GN 57.1 Retaining magnets

Elesa+Ganter GN 57.1 retaining magnets.The retaining magnets GN 57.1 with rubber jacket form a system together with the steel part that shields and strengthens the magnet, optimally concentrating the magnetic flux on the rubberized magnetic surface. The rubber protects sensitive surfaces from being damaged by the magnet and also delivers a high friction coefficient, resulting in high lateral displacement forces.Types:- Type A: with 1 female thread- Type B: with 2 female threadsMaterial:- Steel p ....

E+G GN 57.2 Retaining magnets

E+G GN 57.2 Retaining magnets

Elesa+Ganter GN 57.2 retaining magnets with rubber jacket.The retaining magnets GN 57.2 with rubber jacket form a system together with the steel part that is especially strong, shielding the magnet, increasing the depth of its effect and optimally concentrating the magnetic flux on the rubberized magnetic surfaces. This makes these magnets particularly well suited for use on surfaces that may have thick coats of paint or feature rounded or uneven shapes. The rubber protects sensitive surfaces fr ....

E+G GN 58 w/Bore

E+G GN 58 w/Bore

Elesa+Ganter GN 58 magnet, with bore Housing: Steel Material of the magnet: Aluminium, nickel, cobalt AINiCo AN, temperature resistant up to 280° C Lacquering red, temperature resistant up to 180° C Pot magnets GN 58 are a non-shielded magnetic system. To ensure that the magnetic properties (adhesive forces) are not impaired, the fixing screws must be made of non-magnetic material. For easier handling and/or to avoid demagnetisation, these magnets have an iron plate on their adhesive surface.

E+G GN 60 Button Magnet

E+G GN 60 Button Magnet

Elesa+Ganter GN 60 button-type magnetMaterial of the magnet: Aluminium, nickel, cobalt AINiCo AN, temperature resistant up to 280°C Lacquering red, temperature resistant up to 180° C The button-type magnets GN 60 have a split adhesive surface.

E+G GN 62 U-Magnet

E+G GN 62 U-Magnet

Elesa+Ganter GN 62 U-magnetMaterial of the magnet Aluminium, nickel, cobalt AINiCo AN, temperature resistant up to 350°C Lacquering red, temperature resistant up to 180° C The U-magnets GN 62 have a split adhesive surface.

E+G GN 51.7 Magnet

E+G GN 51.7 Magnet

Elesa+Ganter GN 51.7 magnet with rubber jacket.Steel part, nickel-plated.Rubber jacket, Elastomer (TPE), 80 shore A ≈, black.MaterialNeodymium, iron, boron NdFeB ND, temperature resistant up to 80°C

E+G GN 70 discs magnet

E+G GN 70 discs magnet

Elesa+Ganter GN 70 disc magnetMaterialZinc-plated steel.Standard version-Type A: flat.Adhesive discs GN 70 are used as companion parts for retaining magnets, e.g. if a magnet is to be used in connection with non-magnetic materials.They can be fixed with countersunk screws (e.g. DIN 7991), but also with any commercial wood or sheet metal countersunk screws.

E+G GN 70-NI disc magnet st. steel

E+G GN 70-NI disc magnet st. steel

Elesa+Ganter GN 70 disc magnet in stainless steelMaterial: Stainless steel, magnetisableStandard version:-Type A: flat.Adhesive discs GN 70 are used as companion parts for retaining magnets, e.g. if a magnet is to be used in connection with non-magnetic materials. They can be fixed with countersunk screws (e.g. DIN 7991), but also with any commercial wood or sheet metal countersunk screws.

E+G GN 251.6 bolt with magnet

E+G GN 251.6 bolt with magnet

Elesa-Ganter GN 251.6 bolt with magnetMaterial bolt/nut: Steel, zinc plated, blue passivated, class 5.8 (tensile strength 500 N/mm²).Material magnet: Neodymium, iron, boron NdFeB ND, temperature resistant up to 80° C.Setting bolts GN 251.6 with retaining magnet are a shielded magnetic system.Suitable e.g. as workpiece stop, with the magnet holding the workpiece in place.The lock nut (included) can be used to secure the stop screw after positioning.

E+G GN 913.6 grub screw w. magnet

E+G GN 913.6 grub screw w. magnet

Elesa-Gantet GN 913.6 grub screw with magnetMaterial: Steel, zinc-plated, blue passivated, class 5.8 (tensile strength 500 N/mm²).Material of the magnet: Neodymium, iron, boron NdFeB ND, temperature resistant up to 80° C.Grub screws GN 913.6 with retaining magnet are a shielded magnetic system. Suitable e.g. as workpiece stop, with the magnet holding the workpiece in place.

E+G GN 4470 Magnetic catch

E+G GN 4470 Magnetic catch

Magnetic catches GN 4470 are compact parts that hold covers, doors and sliding doors closed.The rubberized magnetic surface reduces noise and prevents damage to the opposite part.The contact plates for diverse installation situations expand the possible range of applications and are used, for example, when magnetic catches are desired but the opposite part is non-magnetic. For magnetic catches of types A1 and A2, full-surface contact in the area of the locking plate must be ensured during instal ....

0
0

Cart

Item removed. Undo