E+G Indexing plungers, lock pins E+G Spring plunger Spring plungers with and without coating. E+G Press piece with signal E+G GN 615 spring plunger Elesa+Ganter GN 615 threaded ball spring plungers with either normal end-force (K or KN marking) or with heavy end-force (body with 2 longitudinal markings) (KS or KSN).For material types please see datasheet. E+G GN 615.3 spring plunger Elesa+Ganter GN 615.3 threaded ball spring plungers in black-oxide steel or stainles steel.Thread locking:- MVK (For sufficient quantities): Thread locking by means of micro-encapsulated red patch. Working temperature: from -40°C to +170°C.- PFB: thread locking by means of polyamide blue coating. Working temperature: from -50°C to +90°C.For more information regarding versions and material please see datasheet. E+G GN 615.1 spring plunger Elesa+Ganter GN 615.1 threaded bolt spring plungers in black-oxide steel.- Version B: hardened steel bolt, black-oxide steel spring with normal end-force.- Version BS: zinc-plated steel bolt, black-oxide steel, housing with two longitudinal marks.For more information regarding versions and material please see datasheet. E+G GN 615.1 spring plunger Elesa+Ganter GN 615.1 threaded bolt spring plungers in stainless steel.- Version BN: hardened steel bolt, black-oxide steel spring with normal end-force.- Version BNS: zinc-plated steel bolt, black-oxide steel, housing with two longitudinal marks.For more information regarding versions and material please see datasheet. E+G GN 615.2 spring plunger Elesa+Ganter GN 615.2 Threaded ball spring plungers.Threaded body: Acetal resin based (POM) technopolymer, screwdriver slotted head. Resistant to solvents, oils, greases and other chemical agents.Ball and spring: - Execution NI: hardened stainless steel ball, stainless steel spring.- Execution P: technopolymer ball, stainless steel spring.Working temperature from -30°C to +50°C.For more information see datasheet. E+G GN 616 spring plunger Elesa+Ganter GN 616 Spring plungers with bolt are used as detents as well as for push-on and push-off applications and ejectors.The slot on the plunger side is provided for blind hole applications. A special screw driver GN 616.5 is available.Types:- S: Bolt Steel, standard spring load- SS Bolt Steel, high spring load (housing with 2 longitudinal markings)- K Bolt Plastic, standard spring load- KN Stainless steel, with nylonbolt- SN Stainless steel with stainless steel boltSpecification: - Housi .... E+G GN 614.3 spring plung Elesa+Ganter GN 614.3 spring plungers are installed axially through the depth of the hole whereby the dimension "z" of the chamfer has to be taken into consideration.Stainless steel, thanks to its high resistance to corrosion, allows the application of these spring plungers on machines and equipment in those sectors where laws or particular hygienic, climatic and environmental factors make it mandatory to usecorrosion resistant materials. Due to the thin wall of the shell press fitting is not re .... E+G GN 614.2 spring plunger Elesa+Ganter GN 614.2 double ended smooth balls spring plungers.Body: Brass with central horizontal knurling.Balls and spring: Hardened stainless steel balls, stainless steel spring. E+G GN 614 spring plunger Elesa+Ganter GN 614 smooth ball spring plungersBody: - Acetal resin based (POM) technopolymer. Resistant to solvents, oils, greases and other chemical agents (execution KU and KD).- Brass (execution MS).Ball and spring:- Execution KU: hardened stainless steel ball, stainless steel spring.- Execution KD: technopolymer ball, stainless steel spring.- Execution MS: hardened stainless steel ball, stainless steel spring.Working temperature from -30°C to +50°C (for execution KU and KD).Accessories: H .... E+G GN 614.1 mounting plunger Elesa+Ganter GN 614.1 holder for smooth ball spring plunger.Standard versions available:- Type L: Fixing from the left.- Type R: Fixing from the right.- Type B: Fixing from both sides.Material: Zinc alloy die-cast, nickel plated. E+G GN 249 ball button Elesa+Ganter GN 249 striker bushings.Striker bushings are used together with ball or bolt spring plungers when a high wear resistance contact surface is required. Inparticular, they are recommended for use with plungers with high load springs and plungers with reinforced spring.Material: Ground and hardened steel. E+G GN 249.1 ball button Elesa+Ganter GN 249.1 ball button in steel.Ball buttons GN 249.1 are mainly used with spring plungers when low wear and exact positioning are needed.To achieve optimal locking of the spring plungers, the maximum distance a between the ball button and the spring plunger should not be exceeded. The maximum distance a is calculated from the difference between the compression w of the selected plunger and the indentation depth s of the ball in the recess.These ball buttons are especially recommended .... E+G GN 513 spring element Elesa+Ganter GN 513 threaded spring element. Suitable for detenting, positioning or for clamping elements by means of the spring pressure load.Black-oxide and case-hardened steel end.- Execution I: with female thread.- Execution H: semispherical.- Execution K: with bolt.- Execution P: prismatic.Spring pressure:- description with suffix -1: normal end-force spring, with phosphatised steel back assembly ring, anthracite colour;- description with suffix -2: heavy end-force spring, with zinc-plated .... E+G GN 815 spring plunger Elesa+Ganter GN 815 threaded plungers with screwdriver slotted head.The screwdriver slot on the head of the plunger is also usefull to provide an indication of the position of the blocked element.Version ST:- Body: Black-oxide steel, screwdriver slotted head.- Ball and spring: Hardened steel ball, steel spring.Version NI:- Body: AISI 303 stainless steel, screwdriver slotted head.- Ball and spring: Hardened stainless steel ball, stainless steel spring.For more information please see datasheet. E+G GN 815.1 spring plunger E+G GN 815.1 Spring plungers are used as stops as well as thrust elements or ejectors.Types- Type ST: Steel, standard spring load- Type STS: Steel, high spring load- Type NI: Stainless steel, standard spring load- Type NIS: Stainless steel, high spring loadMaterialType ST/STS: Housing in Steel, blackened and Ball in Steel, hardenedType NI/NIS: Housing in Stainless steel AISI 303 and Ball in Stainless steel AISI 420C, hardenedIdentification of type STS / NIS: Housing with 2 longitudinal marking .... E+G GN 611 spring plunger Elesa+Ganter GN 611 threaded bolt spring plungers are normally used for machining metal sheets, as ejectors for push-on or push-off operations or as cushion.The slot on the plunger side is provided for a blind hole application. A special screw driver GN 611.5 is available.Threaded body: Black-oxide steel, partially coated with PFB polyamide blue coating for threads instant locking (see datasheet).Bolt: Case-hardened ground black-oxide steel.Spring: Steel.- Version L: with normal end-force.- Vers .... E+G GN 610 spring plunger Elesa+Ganter GN 610 spring loaded shells. Designed for applications where in a confined space relatively long strokes arerequired. In such cases the depth of the mounting hole is determined by the preload required.Material:Shell: Steel, nickel-plated.Spring: Stainless steel. E+G GN 714 side thrust pin Elesa+Ganter GN 714 side thrust pin offers the opportunity to design your own pin, to be screwed into the thrust plate. Theknurled body requires hole with H8 tolerance. For easy mounting suitable tool GN 715.1 is available.Body: Blank aluminium.Thrust plate: Hardened black-oxide steel with female thread.Gasket: NBR synthetic rubber.Steel loaded spring: - Low spring load (grey)- Medium spring load (black)- High spring load (silver)For more information please see datasheet. E+G GN 715 side thrust pin Elesa+Ganter GN 715 side thrust spring pins are practical and versatile elements for positioning and locking pieces to be machined. They are used for operations such as boring, milling, tapping, welding, brazing, mounting, gluing, temporary or permanent equipping,marking, engraving, etc. They completely replace expensive equipment, take a limited space and are easily assembled to holes drilled with H8 tolerance. To make it easier to mount the side thrust pins, it is recommended to use GN 715.1 a .... E+G GN 713 side thrust pin Elesa+Ganter GN 713 side thrust pins. The threaded body of GN 713 side thrust pins allows to adjust the protruding height of the element. For design and assemblyinformation see GN 715 side thrust pins.To insert these side thrust pins suitable GN 713.1 spanners are available.Standard execution:- Execution SB: gold body with NBR synthetic rubber gasket. Universal use also in environments with machining residues.Maximum working temperature 120° C (avoid contact with halocarbons, hydraulic fluids w .... E+G GN 715.2 eccentric bushing Elesa+Ganter GN 715.2 eccentric bushing.Used to position GN 715 side thrust pins correctly. By using the eccentric bushings, the thrust pin can be positioned very precisely to adapt to the tolerance of the piece to be machined.Material: Black-oxide steel.For more information please see datasheet. E+G GN 716 side thrust pin Elesa+Ganter GN 716 side thrust pin. Designed for holding positioning and locating a work piece.To ensure a positive hold, the steek body have to be pressed into the housing by at least the dimension l3. If these pins arestored over an extended period, the elastomer spring parts should be kept load free.Executions:- BST: With steel ball in both sides- EKU: With acetal resin ball in one side- ENI: With stainless steen ball in one side- EST: With steel ball in one sideFor more information please s .... E+G GN 614.4 spring plunger Elesa+Ganter GN 614.4 spring plungers are use for locking, as pressing and back-off pins, but also as impact dampers.A tolerance of H7 for the location hole of d1 is recommended.Type KU:- Body: AISI 305 stainless steel.- Bolt: Acetal resin based (POM) polyacetal bolt, working temperature up to 50 °C.- Spring: AISI 631 stainless steel.Type NI:- Body: AISI 305 stainless steel.- Bolt: AISI 303 stainless steel.- Spring: AISI 631 stainless steel.For more information please see datasheet. E+G GN 615.4 spring plunger Elesa+Ganter GN 615.4 threaded bolt spring plungers with hexagon socket head. Are use as detents as well as for push-on and push-off applications and ejectors.Steel version:Threaded body: Black oxide steel.Bolt: Steel hardened.Spring: AISI 631 stainless steel.- Version B: Steel, standard spring load.- Version BS: Steel, high spring load.Special executions on request: With locking thread PFB/MVK.Stainless steel version:Threaded body: AISI 303 stainless steel.Bolt: AISI 420C stainless steel.Spring .... E+G GN 614.5 spring plunger Elesa+Ganter GN 614.5 spring plungers Housing: Plastic (Polyacetal POM) KU. temperature resistant up to 50 °C Ball: Stainless Steel AISI 420C hardened. Housing and ball: Plastic (Polyacetal POM) KD. temperature resistant up to 50 °C Spring: Stainless Steel AISI 631. E+G GN 415 side thrust pin Elesa+Ganter E+G GN 415 side thrust pin.Side thrust pins GN 415 have a compact design and offer maximum flexibility for tensioning and holding parts. A variety of thrust pin designs as well as two different spring forces are available. Depending on the installation situation, the side thrust pins offer a pull-down effect operating within height h2. They are fastened by means of holes or slots. The side thrust pins are installed fully assembled. If necessary, the installation position of the thru .... E+G Gn 614.6 spring plunger E+G Spring plungers GN 614.6 are primarily used in toolmaking as spring-loaded stops as well as for pressure and hold-off functions.
