E+G Indexing plungers E+G Indexing plunger w. rest E+G GN 8170 indexing plunger GN 8170 Stainless Steel-Indexing plungers are intended for use in hygienic areas. The wiper between the pin and guide keeps the mechanics sealed, and the high surface quality and dead-space-free mounting prevent dirt from adhering and facilitate cleaning.The type FH satisfies hygienic requirements on the knob side. For uses in which the bolt is also subject to hygienic requirements, the type VH is used. Mounting holes and through-holes in the housing must be at a right angle, free of burrs and w .... E+G GN 608.1 indexing plunger Elesa+Ganter GN 608.1 indexing plungerWith flange and rest position has compact dimensions and are used on thin metal sheets.Body with flange: Zinc-plated die-cast zinc alloy with two holes for assembly with countersunk head screws.Plunger: Black-oxide steel with hardened end. Suggested matching hole in H7 tolerance."Push/Pull" knurled knob: High resilience polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemical agents. E+G PMT.200 indexing plunger Elesa+Ganter PMT.200 Indexing plunger with rest positon. Is is made from SUPER-technopolymer and is resistant to solvents, oils, greases and other chemical agents. E+G PMT.101 indexing plunger Elesa+Ganter PMT.101 SUPER-technopolymer indexing plungers with rest positionThreaded body: Special glass-fibre reinforced polyamyde based (PA) SUPER-technopolymer, black colour. Resistant to solvents, oils, greases and other chemical agents.Plunger: Black-oxide hardened steel or AISI 303 stainless steel.Suggested tolerance for matching hole = H7.Knob: High-resilience polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemical agents.Sp .... E+G GN 617.1 indexing plunger Elesa+Ganter GN 617.1 Indexing plunger with rest position. E+G GN 607.1 indexing plunger Elesa+Ganter GN 607.1 indexing plungerCompact dimensions and are used where positioning operations are required in very limited overall clearance and where the plunger needs to be locked in the retracted position. The high corrosion resistance of AISI 303 stainless steel, makes these elements particularly suitable for applications on machines and equipment for the food processing, chemical and pharmaceutical industry.Body and plunger: AISI 303 stainless steel. Matching hole for plunger is sugges .... E+G GN 607.3 indexing plunger Elesa+Ganter GN 607.3 Indexing plungerFor installation in thin walled equipment, with rest position.Indexing plungers GN 607.3 have been developed for installation in thin walled equipment.It has to be taken into consideration that, depending on the mounting plate thickness ‚s‘, the protruding plunger length ‚l1‘ and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.For design reasons the positional accuracy of this indexing plunge .... E+G GN 822.7-NI indexing plunger Elesa+Ganter GN 822.7 indexing plunger in stainless steelThreaded body: AISI 303 stainless steel. Plunger: AISI 303 stainless steel. Suggested matching hole with tolerance +0.03/+0.08. "Push/Pull" knurled knob: Stainless Steel AISI 305. Spring: AISI 301 stainless steel.Standard versions available: - Type BN: without rest Position, with Stainless Steel-Knob. - Type CN:with rest Position, with Stainless Steel-Knob.Accessories on request: Distance bushings GN 609 / GN 609.5. Flat hexagonal nuts GN .... E+G GN 417-C indexing plunger Elesa+Ganter Indexing plungers GN 417-C with rest positionUsed for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position. The screwing range is chosen in such a way that washers ISO 7092 can be used.Body: Zinc die-casting, plastic co .... E+G GN 817.4 indexing plunger Elesa+Ganter GN 817.4 Indexing plunger.Similar to GN 817, but with a T-handle instead of a round head.This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.For materials please see datasheet.Standard versio .... E+G GN 817.4-NI indexing plunger Elesa+Ganter GN 817.4 Indexing plunger in stainless steelSimilar to GN 817, but with a T-handle instead of a round head.This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.For materials please see datashe .... E+G GN 612.9 indexing plunger Elesa+Ganter GN 612.9 Cam action indexing plungerUsed in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.Threaded body: Zinc alloy die-cast, plastic coated, black textured finish.Plunger: Steel zinc-plated, blue passivated.Suggested matching hole with tolerance -0.5.Lever: Polyamide based (PA) technopolymer, black colour, matte finish, not removable. E+G GN 817.8-NI indexing plunger Elesa+Ganter GN 817.8-NI indexing plunger- Type B: without rest position, without locknut. - Type C: with rest position, without lock nut. Threaded Body: Stainless steel NI. Plunger: Stainless Steel AISI 303. Knob: Black Plastic (Polyamide PA). E+G GN 817-NI-RT Indexing plunger Elesa+Ganter GN 817-NI-RT Indexing plungerTypes- Type B: without rest position, without locknut- Type BK: without rest position, with lock nut- Type C: with rest position, without lock nut- Type CK: with rest position, with lock nutMaterial: Stainless Steel NI AISI 303 with plunger chemically nickel platedNon removable knob in Plastic/ Technopolymer (Polyamide PA), red colour RAL 3000 E+G GN 817-RT Indexing plunger Elesa+Ganter GN 817-RT Indexing plungerTypes - Type B: without rest Position, without locknut - Type BK: without rest Position, with lock nut - Type C: with rest Position, without lock nut - Type CK: with rest Position, with lock nutMaterial: Blackened steel, plunger hardened Non removable knob in Plastic/ Technopolymer (Polyamide PA), red colour RAL 3000 E+G GN 612.10 Indexing plunger Elesa+Ganter GN 612.10 Cam action indexing plungerMaterial: Guide in zinc die casting, plastic coated, black, textured finish.Pin in Stainless Steel AISI 303 Non-removable knob in plastic / Technopolymer (Polyamide PA), black, matt E+G GN 612.3-NI Indexing plunger Elesa+Ganter GN 612.3-NI Cam action indexing plungerSpecification - Type A: without plastic cover - Type B: with plastic coverMaterial:Guide, weldable AISI 304 stainless steelPlunger AISI 303 stainless steel Spring in stainless steel 301 Plastic cover (Polyamid PA), black, matt E+G GN 412 Indexing plunger Elesa+Ganter GN 412 Indexing plungerTypes - Type B: without rest position - Type C: with rest positionIdentification no. - No. 1: Mounting from the front - No. 2: Mounting from the backMaterial:Guide in zinc die casting, zinc plated, blue passivated Plunger in stainless steel AISI 303 Spring in stainless steel AISI 301 Non-removable knob in plastic (Polyamide PA), black, matt finish E+G GN 414 safety indexing plunger Elesa+Ganter GN 414-NI Stainless Steel Safety indexing plungerMaterial: Stainless Steel AISI 303 Plunger chemically nickel plated Non-removable knob in Plastic (Polyamide PA), black-grey, RAL 7021, matt. Temperature resistant up to 80 °C Push-button in plastic (Polyacetal POM), red, RAL 3000, matt.NB! Version AK is not available from us. E+G GN 817.1 Indexing plungers Elesa+Ganter GN 817.1 Indexing plungerTypes - Type B: without rest position - Type C: with rest positionMaterial: Guide in zinc die casting, plastic coated, black, textured finish Pin in Stainless Steel AISI 303 Non-removable knob in plastic / Technopolymer (Polyamide PA), black, matt E+G GN 817.1-RT Indexing plunger Elesa+Ganter GN 817.1-RT Indexing plungerTypes - Type B: without rest position - Type C: with rest positionMaterial: Guide zinc die casting, plastic coated with black, textured finish Pin in Stainless Steel AISI 303 Knob in Plastic Technopolymer (Polyamide PA), red RAL 3000 E+G GN 817.9 Indexing plunger Elesa+Ganter GN 817.9 Indexing plunger with long pinTypes – Type B: without rest position – Type C: with rest positionMaterial: Guide in zinc die casting, plastic coated, black, textured finish Pin in Stainless Steel AISI 303 Non-removable knob in plastic / Technopolymer (Polyamide PA), black, matt E+G GN 817.6 indexing plunger Stainless Steel indexing plunger GN 817.6 with sensor for position monitoring allow for electronic monitoring of the plunger pin state.For this purpose, a magnet is integrated into the plunger pin that switches the sensor upon engaging after approx. 2/3 of the engagement distance l1 (The l1 distance is shown in the datasheet beneath). The sensor electronics then outputs a high signal, e.g. to a machine control, and additionally indicates this switch state with an LED on the sensor.To prevent fau .... E+G GN 612 indexing plunger Elesa+Ganter GN 612 lever indexing plungerUsed when the plunger must be retracted quickly.By rotating the lifting lever by 180°, the plunger stops in the retracted position. The lever is kept in this position by a notch.For materials please see datasheet under Documents.Version A: Without lever cover, without locking nutVersion B: With lever cover, with locking nut E+G GN 612 st. steel indexing plunger Elesa+Ganter GN 612 lever indexing plunger. Stainless steel.Used when the plunger must be retracted quickly. By rotating the lifting lever by 180°, the plunger stops in the retracted position. The lever is kept in this position by a notch.For materials please see datasheet under Documents.Version A: Without lever cover, without locking nutVersion B: With lever cover, with locking nut E+G GN 612.2 indexing plunger Elesa+Ganter GN 612.2 cam action indexing plungerUsed when the plunger must be retracted quickly.By rotating the lifting lever by 180°, the plunger stops in the retracted position. The lever is kept in this position by a notch.For materials please see datasheet under Documents.Version A: Without lever cover, without locking nutVersion B: With lever cover, with locking nut E+G GN 612.3 indexing plunger Elesa+Ganter GN 612.3 lever indexing plunger with rest position.Used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch is provided in either position to prevent the lock from rotating. The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.For materials please see datasheet under Doc .... E+G GN 712 R/S Indexing plunger Elesa+Ganter GN 712 Cam action indexing plungerUsed in such applications where the plunger must not protrude continually. When turning the cam by 90° resp. 120° in anti-clockwise direction, the plunger is moved through a curved opening in the body. After that, the plunger is retracted. Depending on the type, the plunger is moved back by a spring in its original position (type A), is held in retracted position (type R), resp. is secured against accidental operation (type S). In order to move th .... E+G GN 712.1 indexing plunger Elesa+Ganter GN 712.1 Cam action indexing plungerUsed in such applications where the plunger must not protrude continually. When turning the cam by 90° resp. 120° in anti-clockwise direction, the plunger is moved through a curved opening in the body. After that, the plunger is retracted.Depending on the type, the plunger is moved back by a spring in its original position (type A), is held in retracted position (type R), resp. is secured against accidental operation (type S).In order to move th .... E+G GN 514 locking plunger Elesa+Ganter GN 514 locking plungerThe indexing pin in the locking plunger is moved via a so-called cardioid mechanism.This mechanism means that the indexing pin is both extended and retracted alone by pressing the operating button (PUSH-PUSH locking mechanism).Please note that the indexing pin cannot absorb any axial forces and that it retracts virtually by spring action; the indexing pin must therefore remain free and easy to move.For material, please see datasheet under Documents. E+G GN 414 safety indexing plunger Elesa+Ganter GN 414 Indexing plunger with safety functionUsed when the inadvertent retraction of the plunger pin is to be prevented. The protruding plunger is first locked and may be unlocked for pulling only by exerting axial pressure on the red safety pushbutton.In every case, the safety lock engages in the front end position, i.e. automatically if the indexing pin protrudes, with the locking mechanism housed fully in the operating button and protected from malfunctions. The specified axial lo .... E+G GN 607.5 indexing plunger Elesa+Ganter GN 607.5 Indexing plunger with rest positionUsed in cases where the indexing pin is temporarily not allowed to protrude.After pulling out, the knob is turned by 90°.An indexing notch prevents the disengaged knob accidentally or through shock impact turning back.The GN 607.5 indexing plungers are intended for welded fixing, in particular for use in steel square tubings.The lug d2 is intended for positioning.The plastic knob with the in-moulded indexing pin is driven on after the wel .... E+G GN 7336.7 indexing plunger Elesa+Ganter GN 7336.7 Knurled knob with indexing plungerUsed for positioning, securing and clamping adjusting elements at the same time.The axial movement of the handle (pulling) pulls the indexing plunger from the engaged position against the spring force, with the knurled knob at the same time remaining connected with form-lock to the clamping screw via a hexagonal element, allowing both clamping and releasing.Threaded body: Zinc-plated steel, blue passivated.Plunger: AISI 303 stainless steel .... E+G GN 7336.8 indexing plunger Elesa+Ganter GN 7336.8 Knurled indexing plunger.An advanced development of the knurled knobs GN 7336.7 with indexing plunger.Like the latter, they are used for positioning, securing and clamping adjusting elements at the same time. This configuration ensures that the indexing plunger cannot be pulled from the indexing bore by turning the knurled knob, but only by deliberately pulling the handle (Safety function!).Threaded body: Zinc-plated steel, blue passivated.Plunger: Steel, nitrided and blac .... E+G GN 822.1 mini indexing plunger Elesa+Ganter GN 822.1 Mini indexing plungerKnown for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°a notch keeps the knob in this position.For material please see datasheet under Documents. E+G GN 822 indexing plunger Elesa+Ganter GN 822 indexing plunger.The technopolymer knurled knob offers a safe and solid grip during operations.When retracting the plunger, the flat faces on the metal body are revealed. Hence the mini indexing plunger can be easily assembled and tightened by means of a hexagonal spanner.Standard executions available:- Type B: without rest position.- Type C: with rest position - pull the knob and turn it by 30°.For material types please see datssheet under Documents. E+G GN 608.6 indexing plunger Elesa+Ganter GN 608.6 indexing plungerWith flange and rest position. Compact dimensions. Used on thin metal sheets.Body with flange: Zinc-plated die-cast zinc-alloy with two holes for assembly with countersunk head screws.Plunger: AISI 303 stainless steel, chemically nickel plated. Suggested matching hole in H7 tolerance."Push/Pull" knurled knob: High resilience polyamide based (PA) technopolymer, black colour, matte finish. Resistant to solvents, oils, greases and other chemicals. E+G GN722.1 indexing plunger Elesa+Ganter GN 722.1 spring latch for fixing with welding spotsUsed when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.The square bar allows the latch to be welded in any desired position. To prevent excessive heating up and the resulting change in the spring properties, fixing with welding spots is recommended.Spring latches GN 722.1 are designed for use in steel construction .... E+G GN 722.2 indexing plunger Elesa+Ganter GN 722.2 Lever indexing plunger with rest position.Guide Steel precision cast. - Version ZB: zinc plated, blue passivated. - Version SW: zinc plated, epoxy resin coating, RAL 9005 black matte finish. Latch in steel precision cast, zinc plated, blue passivated. Plunger in steel, zinc plated, blue passivated. Suggested matching hole with tolerance +0.1/+0.3. Standard versions available - Type A: Latch position right-angled to fixing holes - Type B: Latch position parallel to fixing ho .... E+G GN 722.3 indexing plunger Elesa+Ganter GN 722.3 Spring latchUsed when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning/locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive pro .... E+G GN 612.8 indexing plunger Elesa+Ganter GN 612.8 Cam action indexing plungerUsed in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. The notch allows safe positioning.These cam action indexing plungers made of zinc die casting are very reasonably priced design versions.Threaded body: Zinc alloy die-cast, corrosion-resistant ZNDG Pass. nano®-coating, anthracite coloured.Plunger: Steel zinc-plated, blue passivated.Suggested matching hole with t .... E+G GN 816 locking plunger Elesa+Ganter GN 816 locking plunger.To retract, move against the spring force and hold in the end position by turning by 90°.The shape of the cam curve secures the plunger against accidental operation.For the execution with operation with key (type B) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from authorized removal of the locking plunger. The cober sleeve also provides additional protection against malfunction caused by dir .... E+G Key for GN 816 Elesa+Ganter for locking plungers GN 816 with operation with key (Type B) this key is required to move the plunger.Locking plungers Ø 6 and 8 have the same key GN 816-10. E+G GN 816.1 locking plunger Elesa+Ganter GN 816.1 locking plunger.To retract, move against the spring force and hold in the end position by turning by 90°.The shape of the cam curve secures the plunger against accidental operation.For the type with operation with key (type B) a key is required to move the plunger. In this type, a cover sleeve provides additional security and safety from authorized removal of the locking plunger. The cober sleeve also provides additional protection against malfunction caused by dirt.Thread .... E+G GN 822.6 C indexing plunger Elesa+Ganter GN 822.6 C Mini indexing plunger with rest positionSmall dimensions.To mount, first turn the mini indexing plunger in with the knurled button.Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner. They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.In type C, .... E+G GN 822.7 C indexing plunger Elesa+Ganter GN 822.7 C Mini indexing plungerDistinguished for their small dimensions. Based on the principle of the GN 822 mini indexing plungers, this model combines their clever type of construction with acomplete series of all current sizes of bolts and threads. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.They are inserted into position by holding them by .... E+G GN 822.8 C indexing plunger Elesa+Ganter GN 822.8 C Mini indexing plunger with rest position.Are distinguished for their small dimensions. They are mounted by countersunk screws.Versions C: With rest positionAlso available as B: Without rest position - please see this.For information regarding materials please see datasheet under Documents. E+G GN 717 C Indexing plunger Elesa+Ganter GN 717 indexing plunger with knob and rest position.GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.During assembly, the max. tightening torques shown in the table should not be exceeded when securing the .... E+G GN 817-NI C Indexing plunger Elesa+Ganter GN 817 Stainless Steel-Indexing plungers with long knob plastic, with rest position.Versions: - C with rest position, without lock nut- CK with rest position, with lock nutFor material and more information please go to Documents. E+G GN 817.2 C Indexing plunger Elesa+Ganter GN 817.2 C Indexing plunger correspond to GN 817, it only differ by a longer knob. With rest position.Used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.For materiale speicfications please see datasheet that can be found under Documents. E+G Gn 817 C indexing plunger Elesa+Ganter GN 817 C indexing plunger with long knob plastic, with rest position.Versions:- C with rest position, without lock nut- CK with rest position, with lock nutFor material and more information please go to Documents. E+G GN 7017 Indexing plunger E+G GN 818 indexing plunger Elesa+Ganter GN 818 indexing plunger in stainless steel - with rest position.Indexing plungers with a rest position are used for such applications where the plunger has to stay in its retracted position. In that case, the knob is retracted and afterwards turned by 90°.A notch keeps the plunger in this position.Material:- Stainless Steel AISI 316- Plunger pin chemically nickel platedKnob:- Type CK: Polyamide (PA), black, matte- Type CKN: Stainless Steel AISI 316not removableSpring in Stainless S .... E+G GN 721.1 Indexing plunger Elesa+Ganter GN 721.1 lever indexing plunger. Steel.Used when the plunger must be retracted quickly. By rotating the lifting lever by 180°, the plunger stops in the retracted position. The lever is kept in this position by a notch.Available in different types:Type RA: Right-hand lockType RB: Right-hand lock, with plastic coverType RAK: Right-hand lock, with lock nutType RBK: Right-hand lock, with plastic cover, with lock nutType LA: Left-hand lockType LB: Left-hand lock, with plastic cov .... E+G GN 721.6 indexing plunger Elesa+Ganter GN 721.6 lever indexing plunger in Stainless steel AISI 303.Used when the plunger must be retracted quickly. By rotating the lifting lever by 180°, the plunger stops in the retracted position. The lever is kept in this position by a notch.Available in different types:Type RA: Right-hand lockType RB: Right-hand lock, with plastic coverType RAK: Right-hand lock, with lock nutType RBK: Right-hand lock, with plastic cover, with lock nutType LA: Left-hand lockType LB: Left-hand l .... E+G GN 414.1 indexing plunger Elesa+Ganter GN 414.1-NI and GN 414.1 Indexing plunger with safety button. Comes in black steel or stainless steel.Executions:- A without lock nut- AK With lock nut
