E+G Hinges E+G Handle in steel/alu/zinc Hinges in steel, alu, zinc, etc. E+G GN 7237-NI hinge Elesa+Ganter GN 7237-NI stainless Steel-Multiple-joint hingesare installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism.The hinges have a maximum opening angle of 180°, which provides optimal accessibility and avoids the blocking of escape routes by open doors, for example.Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easycleaning. .... E+G GN 2376 St. steel-plate Elesa+Ganter GN 2376Stainless Steel-Plate with threaded studs. GN 2376 is designed as accessories for Stainless Steel Multiple-joint hinges GN 7237 as well as hinges GN 235 making additional threads, bolts, nuts and washers unnecessary during installation. This eliminates the labor-intensive preinstallation of such parts as well as the need to hold them in place during tightening or loosening.The Stainless Steel-Plates with threaded studs are fastened from the outside via through-holes in the ho .... E+G GN 128/GN 128.2 hinge E+G GN 129 Hinge Elesa+Ganter Hinges GN 129 Material: Zinc-plated steel, blue passivated. Rotation pin and washers: Nickel-plated brass. Hexagon nuts: ISO 4032 Zinc-plated steel, blue passivated. Serrated washer DIN 6797 For securing screws, Zinc-plated steel, blue passivated. Standard versions:- Type D: consisting of three parts. - Type Z: consisting of two parts. Hinges GN 129 are used for top-hung doors. The hinges are normally arranged to the side of the door. In the two-part design, the door can be unhinged .... E+G GN 129.2 Hinge Elesa+Ganter GN 129.2 HingeFor doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged. With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.Material: Zinc-plated steel, blue passivated. Rotation pin and washers: Nickel-plated brass. Hexagon nuts ISO 4032: Zinc-plated steel, blue passivated. Serrated washer DIN 6797: For securing screws, Zinc-plated steel, .... E+G GN 129.2-A4 Hinge Elesa+Ganter GN 129.2-A4 Hinge in stainless steelFor doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged. With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.Material: AISI 316 Stainless Steel A4. Hexagon nuts ISO 4032: AISI 304 Stainless Steel. Serrated washer DIN 6797: For securing screws, AISI 304 Stainless Steel.Standard version available - Type C .... E+G GN 129.2-NI Hinge Elesa+Ganter GN 129.2-NI HingeFor doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged. With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from theoutside as an anti-tamper device.Material: AISI 303 Stainless Steel NI. Hexagon nuts ISO 4032: AISI 304 Stainless Steel. Serrated washer DIN 6797: For securing screws, AISI 304 Stainless Steel.Standard version available - Type C: Fixing from the ba .... E+G GN 129.3 Hinge Elesa+Ganter GN 129.3 HingeFor doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged. By using cylinder screws DIN 912, they are conveniently fixed using threads on the user side or by using through screws for different clamping thicknesses.Material: Zinc-plated steel, blue passivated. Pin and Washer: Nickel-plated brass.Standard version available - Type A: Fixing from the front side. E+G GN 129.5-A4 Hinge Elesa+Ganter GN 129.5-A4 HingeUsed for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper deviceMaterial: AISI 316 Stainless Steel A4. Hexagon nuts ISO 4032: AISI 304 Stainless Steel Serrated washer DIN 6797: For securing screws, AISI 304 Stainless Steel.Standard version available - Type D: consisting of t .... E+G GN 129.5-NI Hinge Elesa+Ganter GN 129.5-NI Hinge stainless steelFor doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged. With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper deviceMaterial: AISI 303 Stainless Steel NI. Hexagon nuts ISO 4032: AISI 304 Stainless Steel. Serrated washer DIN 6797: For securing screws, AISI 304 Stainless Steel.Standard version available - Type D: co .... E+G GN 136 Hinge Elesa+Ganter GN 136 Sheet metal hingeSheet metal hinges GN 136 are low-cost designs for low-load applications.Material: Zinc-plated steel, blue passivated. Pin: AISI 304 stainless steel.Assembly - Type B: with bores for cylinder head screws / pan head screws. - Type C: with bore for countersunk screws. E+G GN 136-NI Hinge Elesa+Ganter GN 136-NI Sheet metal hingeSheet metal hinges GN 136-NI are low-cost designs for low-load applications.Material: AISI 304 stainless steel. Pin: AISI 304 stainless steel.Assembly - Type A: without holes - Type B: with bores for cylinder head screws / pan head screws. - Type C: with bore for countersunk screws. E+G GN 138 Hinge Elesa+Ganter GN 138 HingeWith their attractive design, hinges GN 138 are suitable for use in plant and machinery where a well-designed and stylishappearance is important. Specification: Type A: 2x2 threaded blind bores. plastic coated black, RAL 9005, textured finish SW silver, RAL 9006, textured finish SR Pin in Stainless Steel E+G GN 139.6 Hinge Elesa+Ganter GN 139.6 HingeThe compact design combines safety and attractive appearance. The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.Material: Polished Stainless Steel AISI 316L precision casting Pin in Stainless Steel AISI 316L E+G GN 161 Hinge Elesa+Ganter GN 161 HingeMaterialZinc alloy die-cast, black matte textured, epoxy resin coating.Rotation pinAISI 303 stainless steel.Features and applicationsHinges GN 161 have been designed for commercially available aluminium profiles. With three different types of hinges only, 66different slot widths 'n' can be accommodated. To achieve this the positioning components are set in specially marked recessesin the hinge wings.The rectangular (8x10 mm) positioning components, two pieces hinge wing, .... E+G GN 161.1 Hinge Elesa+Ganter GN 161.1 HingeMaterial: Zinc alloy die-cast, plastic coated.With invisible fixing screws.Versions: - Version SW: RAL 9005 black, matte epoxy resin coating. - Version SR: RAL 9006 silver, matte epoxy resin coating. E+G GN 161.2 Hinge Elesa+Ganter GN 161.2 HingeMaterial: Zinc alloy die-cast, plastic coated.With invisible fixing screws.Surface: - Version SW: RAL 9005 black, matte epoxy resin coating. - Version SR: RAL 9006 silver, matte epoxy resin coating.Assembly: - Type R: Fixed bearing (pin) right. - Type L: Fixed bearing (pin) left. E+G GN 237-ZD,NI,A4 Hinge E+G GN 238 Adjustable hinge Elesa+Ganter GN 238 Adjustable hinge with screw-covers Material: Zinc alloy die-cast. Version SW: RAL 9005 black, matte finish, epoxy resin coating. Version SR: RAL 9006 silver, matte textured finish, epoxy resin coating. Adjustable bushes: Hardened steel. - Type BJ: two-sided adjustable. - Type EJ: one-sided adjustable. - Type NJ: not adjustable. Plastic cover: Black-grey. Rotation pin: AISI 303 stainless steel. GN 238 offer a technically and optically perfect aligenment of the door to its fram .... E+G GN 337 Hinge Elesa+Ganter GN 337 Hinges Material: AISI CF-8 Stainless steel NI- Version GS: San-blasted, matte finish GS Zinc-alloy die-cast ZD, black matte epoxy resin coating. - Version SW: RAL 9005, black, matte finish. - Version SR: RAL 9006, silver, matte finish. Rotation pin AISI 303 stainless steel. - Identification no. 1: fixed bearing (pin) right. - Identification no. 2: fixed bearing (pin) left. Assembly: Version A: two couples of through holes for countersunk-head screws. Rotation angle: Max. 270 .... E+G GN 437 Hinge Elesa+Ganter GN 437 HingeOwing to the structure and the prestress of the friction cones, the hinge has virtually no radial play and no play at all in axial direction.Specification- Type A: 2x2 bores for countersunk head screwZinc die casting ZDPlastic coating:black, RAL 9005, textured finish SWsilver, RAL 9006, textured finish SRFriction cone: Plastic (Polyacetal POM)temperature resistant up to 80 °CSet screw / Hexagon nut:Steel, zinc plated, blue passivatedThe setscrew in the hinges GN 437 all .... E+G GN 437.1 Hinge Elesa+Ganter GN 437.1 Hinges of zinc die casting fit perfectly into a wide range of environments thanks to their timeless design. Moreover, they are matched with the GN 437 functional hinge family as complementary hinges.SpecifikationerType- Type A: 2x2 bores for countersunk screwsMaterial:Hinge- Zinc die casting ZD - plastic coatedCover cap- Plastic (Polyacetal POM)- temperature resistant up to 80 °CColor:- Black, RAL 9005, textured finish SW - Silver, RAL 9006, textured finish SR E+G GN 437.2 Hinge Elesa+Ganter GN 437.2 hinge, lockable, with adjustable hand leverWith GN 437.2 Hinges, doors and covers can be secured at any desired angular position. In its rest position, the hand lever is not connected to the locking thread of the hinge axis, i.e., it can be freely rotated. The serration only engages when the handle is pressed down, allowing the hinge to be clamped. This prevents the engagement from releasing unintentionally. It additionally ensures that the hand lever does not hinder the mo .... E+G GN 437.3 Hinge Elesa+Ganter GN 437.3 hinge with springloaded returnGN 437.3 Hinges with a spring-loaded return allow doors to be automatically opened and closed by means of the torsion spring. The return torque varies with the hinge opening angle. Endurance tests have shown that the torque does not change even after 100,000 opening / closing cycles.Types:Type L2: Spring-loaded return, closing, medium spring forceType R2: Spring-loaded return, opening, medium spring forceMaterial:- ZD: Zinc die casting, plastic .... E+G GN 437.4 Hinge Elesa+Ganter GN 437.4 hinge.GN 437.4 Hinges with detent hold door and covers in the given indexing position without additional mechanics.This is particularly advantageous when machines and systems must be frequently opened and closed for loading and unloading, and it is also useful for servicing or repairs. Undesirable independent closing and opening is prevented. The -3° of the type C2 moreover ensures that the door or cover presses slightly against the housing frame when closed.Types:- Type A .... E+G GN 2370 Spacer plate Elesa+Ganter GN 2370 Stainless Steel spacer plateMaterial: Stainless Steel NI, AISI 304With plain, matte tumbled finish MT E+G GN 2372 Spacer plate with thread Elesa+Ganter GN 2372 Stainless Steel plates with tapped holes.Dimensionally, Stainless Steel plates GN 2372 are designed as accessories for the GN 237 family of hinges, eliminating the need for nuts and washers for mounting.Material: Stainless Steel NI AISI 304.With matt, tumbled finish MT. E+G Hinge CMD.AL Elesa+Ganter CMD.AL hinge Material: Anodised aluminium. Colour: Natural, matte finish. Rotation pin: AISI 303 stainless steel. Guide bushings for pin: Polyamide based (PA) technopolymer. Self-tapping screws 4.2x15.9 DIN 7982, stainless steel (narrow body of the hinge) and M5x10 semi-rounded head screws, stainless steel (large body of the hinge), supplied. E+G CMM-AL Hinge Elesa+Ganter CMM-AL HingeMaterial: Anodised aluminium.Rotation pin: AISI 304 stainless steel.Colour: Natural, matte finish.Assembly: Through holes for countersunk head screws.Rotation angle: Max 270°, between 0° and -90° and between 0° and 180°(0°= condition where the two interconnected surfaces are on the same plane). E+G GN 1362 Weld-on Hinge Elesa+Ganter GN 1362 Weld-on hingeInformation:Stainless Steel-Sheet metal hinges GN 1362 are distinguished by their universally compatible dimensions. The materials used also permit applications in aggressive environments.Type A is fastened via welding or holes created by the customer.Thanks to the standard dimensions, special application-specific solutions can be realized even in relatively small quantities.Material:- Stainless Steel NI AISI 304- Blank BL.Pin:- Stainless Steel AISI 304- Riveted E+G GN 1364 Hinge Elesa+Ganter GN 1364 HingePointed Stainless Steel-Sheet metal hinges GN 1364 are characterized by their compact and universal dimensioning as well as their attractively shaped design. The materials used also permit applications in aggressive environments.Type B is fastened via the existing through-holes using screws or rivets.Material:- Stainless steel AISI 304- Blank BL.Pin:- Stainless steel AISI 304- Riveted E+G GN 237.3 Hinge Elesa+Ganter HN 237.3 Stainless Steel-Heavy duty hingesDesigned for use under tough conditions and are distinguished by a compact design. The hinge pins are integral and allow the hinges to be used in environments with strong vibrations and shocks. The selected materials allow the hinges to be used in aggressive environments. Wear is minimized by the effective friction pairing of the hinge components and lubrication.The type B hinge has centering attachments that prevent lateral slippage under h .... E+G GN 2294 Hinge Elesa+Ganter GN 2294 HingeElesa&Ganter GN 2294 hinges are made of drawn profiled aluminum and are used on doors and covers, for example.Given the external hinge wing, type A hinges allow mounting with a very small door gap.The type I is fastened in the door gap. The mounting screws are therefore inaccessible and hence protected from vandalism when the door is closed.The hinges are delivered loose and must be mounted according to the accompanying instructions. Any hinge combination may be rea .... E+G GN 2295 Hinge E+G GN 2295-elongated hinge E+G GN 2290 bolt sets for GN 2291 Elesa+Ganter GN 2290 bolt sets for hingesGN 2290 Bolt sets are designed as accessories for GN 2291 hinge wings for mounting individual hinge versions.Specification:- Bolt sets with identification no. 1 are designed for hinges with two hinge wings.- bolt sets with identification no. 2 and 3 are designed for hinges with three hinge wings.- Bolt sets with identification no. 2 are used exclusively for short middle wings with a length of 40 mm.- Bolt sets with identification no. 3 must be used for .... E+G GN 2291 Hinge wings for GN 2290 Elesa+Ganter GN 2291GN 2291 Hinge wings can be combined with into individualized hinge versions.As of a hinge wing length of l2 ≥ 250 mm, individual lengths can be realized by shortening the hinge wing given the greater hole spacingsTypes: - AF: exterior hinge wing- AN: exterior hinge wing, with guide step - IF: interior hinge wing - IN: interior hinge wing, with guide stepNo. A: without boresNo. C: with countersunk holesMaterial: - Anodized aluminum EL E+G GN 2292 Hinge Elesa+Ganter GN 2292 hinge for aluminum profiles.GN 2292 Hinges are made of drawn profiled aluminum and are used on doors and covers, for example.The guide step allows them to be quickly and easily mounted to all commercially available profile systems with a nominal size of 40 mm and groove width “n”. Given the external hinge wing, type A hinges allow mounting with a very small door gap. The type I is fastened in the door gap. The mounting screws are therefore inaccessible and hence protecte .... E+G GN 7231 Hinge Elesa+Ganter GN 7231 stainless steel multiple joint hinge.Stainless Steel-Multiple-joint hinges GN 7231 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 90°, making them perfect for use with thick doors.Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning.Stainless Steel- .... E+G GN 7233 Hinge Elesa+Ganter GN 7233 stainless steel multiple-joint hinge.Stainless Steel-Multiple-joint hinges GN 7233 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 120°, allowing for easy accessibility and making them suitable for use with medium-thick doors. Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the intere .... E+G GN 7241 Hinge Elesa+Ganter GN 7241 multiple-joint hinge.Stainless Steel-Multiple-joint hinges GN 7241 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 90°, making them perfect for use with thick doors. Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning. Stainless Steel-Multiple-joint .... E+G GN 7247 Hinge Elesa+Ganter GN 7247 multiple joint hinges.GN 7247 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 180°, making them perfect for use with thick doors. Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning.Stainless Steel-Multiple-joint hinges are generally used in pairs. .... E+G GN 7247.2 Spacer plates Elesa+Ganter GN 7247.2 stainless steel spacer plates.Tolerances of chamfers, different sheet metal thicknesses or the use of seals could mean that the mounting surfaces of multiple-joint hinges on the frame and door do not have the desired separating distance.Stainless Steel-Spacer plates GN 7247.2 are designed with appropriate dimensions as accessories for multiple-joint hinges GN 7241 GN 7243 and GN 7247 . They allow for adjustment in the third plane during mounting. Shimmed individually or in .... E+G GN 7247.4 Spacer plates Elesa+Ganter GN 7247.4 stainless steel spacer plate.Stainless Steel-Plates with tapped holes GN 7247.4 are designed with appropriate dimensions to be used as accessories for the fastening flanges of multiple-joint hinges GN 7241 GN 7243 and GN 7247. The Stainless Steel-Plates are fastened from the outside via through-holes in the housing wall or alternatively by welding to the inside of the wall. This results in effective protection against vandalism, and the outsides of the housing remain free .... E+G GN 7247.6 Spacer plates Elesa+Ganter GN 7247.6 Spacer plate for hinges.Stainless Steel-Plates GN 7247.6 are designed with appropriate dimensions to be used as accessories for the fastening flanges of multiple-joint hinges GN 7241 GN 7243 and GN 7247. The Stainless Steel-Plates are fastened from the outside via through-holes in the housing wall or alternatively by welding to the inside of the wall. This results in effective protection against vandalism, and the outsides of the housing remain free of attachments that do ....
