E+G Handles and knobs E+G Clamping Knobs GN 5435 Star knob Elesa+Ganter GN 5435 stainless steel star knobStainless steel AISI 316 L (A4)- Matt (Ra < 0.8 µm) MT- Polished (Ra < 0.8 µm) PLSealing ring: hydrogenated acrylonitrile butadiene rubber (H-NBR), bluetemperature resistant -25 °C to +150 °CHardness 85±5 Shore AFDA compliantInformationGN 5435 star knobs are intended for use in hygiene areas. The sealed mounting surface enables mounting without dead spaces; the High quality finish and the large corner radius prevent adherence of dirt and f .... GN 5445 Three lobe knob Elesa+Ganter GN 5445 stainless steel Three lobe knobStainless steel AISI 316 L (A4) - Matt (Ra < 0.8 µm) MT - Polished (Ra < 0.8 µm) PLSealing ring: hydrogenated acrylonitrile butadiene rubber (H-NBR), bluetemperature resistant -25 °C to +150 °CHardness 85±5 Shore AFDA compliantInformationGN 5445 Three lobe knob are intended for use in hygiene areas. The sealed mounting surface enables mounting without dead spaces; the High quality finish and the large corner radius prevent adherence .... E+G VB.239 Three-arm knob Elesa+Ganter VB.239 Three-arm knobMaterial: High-strength, reinforced phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Standard execution:Black-oxide steel hub with uncovered front end and pre-drilled blind hole. See table for maximum permissible boring diameters d' and d". E+G VB.639 Three-armed knob Elesa+Ganter VB.639 Three-arm knobMaterial: Glass-fibre reinforced polyamide based technopolymer (PA) with the exception of VB.639/130 which is in glass-fibre reinforced polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly- Execution A: black-oxide steel boss, plain blind hole.- Execution B: brass boss, tapped blind hole. E+G VB.639 FP Three-armed knob Elesa+Ganter VB.639 FP Three-arm knobMaterial: Glass-fibre reinforced polyamide based technopolymer (PA) with the exception of VB.639/130 which is in glass-fibre reinforced polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: Brass boss, tapped through hole. E+G VB.639 p Three-armed knob Elesa+Ganter VB.639 p Three-arm knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ). E+G VB.639-SST Three-armed knob Elesa-Ganter three-arm knob VB.639-SST with stainless steel boss.Material: Glass-fibre reinforced polyamide based technopolymer (PA) with the exception of VB.639/130 which is in glass-fibre reinforced polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: AISI 303 stainless steel boss, tapped blind hole. E+G VCT Lobe knob Elesa+Ganter VCT. Lobe knobs with coloured centre capMaterial: High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Coloured centre cap (only for VCT.32-40-50-63-74-95)Technopolymer, matte finish.To order, add the index of the colour (C9, ..., C6) to the code and the description.On request and for sufficient quantities, it can be supplied in other colours or with customised graphic symbols, marks or wri .... E+G VCT.p Lobe knob Elesa+Ganter VCT.p Lobe knob with coloured centre capMaterial: High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Coloured centre cap (only for VCT.32-40-50-63-74-95)To order, add the index of the colour (C9, ..., C6) to the code and the description. On request and for sufficient quantities, it can be supplied in other colours or with customised graphic symbols, marks or writings.Standard execution: Z .... E+G CA.VCT Centre cap Elesa+Ganter CS.VCT Caps for Lobe knobColours:Black RAL9005Light blue RAL5024Blue RAL5019Grey RAL7035Yellow RAL1021Orange RAL2004Red RAL3000 E+G VCT.FP Lobe knob Elesa+Ganter VCT. FP Lobe knobMaterial: High resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard execution: Brass boss, threaded through hole. E+G VCT.AE-V0 Lobe knob Elesa+Ganter VCT.AE-V0 Lobe knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer certified self-extinguishing UL-94 V0. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: Brass boss with tapped blind hole (VCT.25) or through hole (VCT. from 32 to 50).Centre cap: Glass-fibre reinforced technopolymer certified self-extinguishing UL-94 V0, black colour, matte finish, supplied assembled. E+G VCT. SOFT Lobe knob Elesa+Ganter VCT.p SOFT Lobe knobMaterial: High-resilience polypropylene based (PP) technopolymer, coated with thermoplastic elastomer (TPE) "soft-touch" chemically bonded, hardness 70 Shore A. Resistant to solvents, oils, greases and other chemical agents.The coating material is certified according to FDA (U.S. Food and Drug administration).Colour: Black, matte finish.Centre cap: Polypropylene based technopolymer (PP), in the six standard colours, matte finish. On request and for sufficient qua .... E+G VCT.p-SOFT Lobe knob Elesa+Ganter VCT.p SOFT Lobe knobMaterial: High-resilience polypropylene based (PP) technopolymer, coated with thermoplastic elastomer (TPE) "soft-touch" chemically bonded, hardness 70 Shore A. Resistant to solvents, oils, greases and other chemical agents.The coating material is certified according to FDA (U.S. Food and Drug administration).Colour: Black, matte finish.Centre cap: Polypropylene based technopolymer (PP), in the six standard colours, matte finish. On request and for sufficient qua .... E+G VC.692 Lobe knob Elesa+Ganter VC.692 Lobe knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard execution: Brass boss, threaded blind hole. E+G VC.692 p Lobe knob Elesa+Ganter VC.692 p Lobe knobMateriale: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard execution: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ). E+G VC.692 CLEAN Lobe knob Elesa+Ganter VC.692-CLEAN Lobe knobGlass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: White similar to RAL 9002, matte finish.Assembly: AISI 303 stainless steel boss, tapped blind hole. E+G VC.692 Cromeplated lobe knob Elesa+Ganter VC.692 Chrome-plated lobe knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer, chrome-plated, semi-glossy finish.Assembly: Brass boss, tapped blind hole. E+G VC.692-SST Lobe knob Elesa+Ganter VC.692-SST Lobe knob with stainless steel threaded blind hole.Material: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard execution: AISI 303 stainless steel boss, threaded blind hole. E+G VC.692 SST-p VCT Lobe knob Elesa+Ganter VC.692-SST-p Lobe knob with thread stud in stainless steelMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard execution: AISI 303 stainless steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ). E+G VC.192 Lobe knob Elesa+Ganter VC.192 Lobe knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: - Execution A: black-oxide steel boss, plain blind hole.- Execution B: brass boss, plain or tapped blind hole. E+G VC.192 p Lobe knob Elesa+Ganter VC.192 p Lobe knob with threadMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ). E+G VC.192 SST Lobe knob Elesa+Ganter VC.192 SST Lobe knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: AISI 303 stainless steel boss, tapped blind hole. E+G VC.192 SST-p-Lobe knob Elesa+Ganter VC.192 SST-p Lobe knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: AISI 303 stainless steel threaded stud. E+G Lobe knob VC.253 Elesa+Ganter VC.253 Lobe knob shortened seriesMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Black-oxide steel boss, tapped through hole. E+G VC.254 Lobe knob Elesa+Ganter VC.254 Lobe knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Brass boss, tapped through hole and large metal locking face.ConformityUNI 6960-71 type B with through hole. E+G GN 5334 lobe knob st. steel Elesa+Ganter GN 5334 Lobe knobMaterial: AISI 304 stainless steel, sandblasted matte finish.Assembly- Type C: with butt-welded hub, H7 reamed blind hole.- Type E: with butt-welded hub, tapped blind hole.For fixing GN 5334 on shafts by a grub screw see Technical Data. E+G GN 5334 lobe knob st. steel Elesa+Ganter GN 5334 Lobe knobMaterial: AISI 304 stainless steel, sandblasted matte finish. E+G GN 5335 lobe knob st. steel Elesa+Ganter GN 5335 Lobe knobMaterial: AISI 304 stainless steel.Finish- sandblasted, matte finish.- Version PL: polished.Assembly- Type C: hub, H7 reamed blind hole.- Type E: hub, tapped blind hole.- Type D: hub, tapped through hole.For fixing GN 5335 on shafts by a grub screw see Technical Data. E+G GN 5336 lobe knob Elesa+Ganter GN 5336 Lobe knobMaterial: Cast aluminium.- Execution PL: with deburred and mirror-polished finish.- Execution MT: with sandblasted matte finish.Assembly- Execution A: hub not drilled, only with matte finish.- Execution C: hub, H7 reamed blind hole.- Execution E: hub, tapped blind hole.- Execution D: hub, tapped through hole.For fixing GN 5336 on shafts by a grub screw see Technical Data. E+G DIN 6335 lobe knob cast Elesa+Ganter DIN 6335 Lobe knobMaterial- cast aluminium with matte finish (version MT)- cast iron.Assembly- Type B: hub, H7 reamed through hole.- Type C: hub, H7 reamed blind hole.- Type D: hub, tapped through hole.- Type E: hub, tapped blind hole. E+G DIN 6336 lobe knob cast iron Elesa+Ganter DIN 6336 Lobe knobMaterial- cast aluminium with matte finish (version MT)- cast aluminium with deburred and mirror polished finish (version PL).- cast iron.Assembly- Type B: hub, H7 reamed through hole.- Type C: hub, H7 reamed blind hole.- Type D: hub, tapped through hole.- Type E: hub, tapped blind hole. E+G GN 6335.9 star knob Elesa+Ganter GN 6335.9 Star knob high clamping forceKnob: Polyamide-based (PA) reinforced technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Threaded insert: Black-oxide nitrided steel.Axial ball bearing: Hardened steel. E+G Security lobe knob VLS Elesa+Ganter Security lobe knob VLS.Lobe solid cap: Glass-fibre reinforced polyamide based (PA) technopolymer with security anti-intrusion-profiled key slot. Resistant to solvents, oils, greases and other chemical agents.Flange: Technopolymer, ultrasonically welded.Colour: Black, matte finish.Clamping element: Acetal resin based (POM) technopolymer.Assembly: Brass boss, tapped blind hole. E+G VLS.SST-p lobe knob Elesa+Ganter VLS.SST-p Security lobe knob, stainless steelLobe solid cap: Glass-fibre reinforced polyamide based (PA) technopolymer with security anti-intrusion-profiled key slot. Resistant to solvents, oils, greases and other chemical agents.Flange: Technopolymer, ultrasonically welded.Colour: Black, matte finish.Clamping element: Acetal resin based (POM) technopolymer.Assembly: AISI 303 stainless steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data). E+G GN 5337.3/GN 5337.3 st. steel Elesa+Ganter GN 5337.3 Safety star knobKnob Plastic: Technopolymer (Polyamide PA) glass fibre reinforced, temperature resistant up to 130 °C, black, matt finishThreaded bush / Threaded stud- ST: Steel, blackened- NI: Stainless Steel AISI 303 E+G VLSK lobe knob Elesa+Ganter VLSK Security lobe knob with lockMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer with slot for codified key lock. Resistant to solvents, oils, greases and other chemical agents.Central closing cap: Technopolymer black colour.Flange: Technopolymer, ultrasonically welded.Colour: Black, matte finish.Clamping element: Glass-fibre reinforced polyamide based (PA) SUPER-tecnopolymer.. E+G VCRT Lobe knob Elesa+Ganter VCRT. Lobe knob with square holeMaterial: Glass reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: Square through hole with brass reinforcement. On request and for sufficient quantities, it can be supplied with square through hole without brass reinforcement. E+G VCR.192 Lobe knob Elesa+Ganter VCR.192 Lobe knob with square holeMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Square through hole with brass reinforcement. E+G VZ Knurled knob Elesa+Ganter VZ. Knurled knobs with square holeMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Standard execution: Square through hole with brass reinforcement. E+G VTL Lobe knob Elesa+Ganter VLT. Lobe knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Closing cap: Polypropylene based (PP) technopolymer, RAL 2004 orange colour, glossy finish with matte central surface, snap-in mounting.Standard executions- VTL-B: brass boss, threaded blind hole.- VTL-p: zinc-plated steel threaded stud, chamfered flat end according to UNI 947: ISO 4753 (see Technical Data). E+G ELK Lobe knob Elesa+Ganter ELK. Lobe knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Grey-black, matte finish.Assembly- Execution A: black-oxide steel boss, H9 reamed blind hole.- Execution B: brass boss, tapped blind hole.Cap: Technopolymer in Ergostyle colours, matte finish. Ultrasonically welded to the body of the knob.Cap colours:C1: Black RAL 7021C2: Orange RAL2004C3: Grey RAL7035C4: Yellow RAL7035C5: Light bl .... E+G ELK.p Lobe knob Elesa+Ganter ELK.p Lobe knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Grey-black, matte finish.Assembly: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ).Cap: Technopolymer in Ergostyle colours, matte finish. Ultrasonically welded to the body of the knob.Cap colours:C1: Black RAL 7021C2: Orange RAL2004C3: Grey RAL7035C4: Yellow RAL7035C5: Ligh .... E+G ELK.FP Lobe knob Elesa+Ganter ELK.FP Lobe knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Grey-black, matte finish.Assembly: Black-oxide steel boss, H7 reamed through hole.Cap with through hole: Technopolymer in Ergostyle colours, matte finish. Ultrasonically welded to the body of the knob.Coluorcodes caps:C1: Black RAL 7021C2: Orange RAL2004C3: Grey RAL7035C4: Yellow RAL1021C5: Light Blue RAL5024C6: Red RAL3000 E+G VL.140 Lobe knob Elesa+Ganter VL.140 Lobe knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembl: Black-oxide steel hub, pre-drilled blind hole. E+G VL.155 Lobe knob Elesa+Ganter VL.155 Lobe knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly- Execution A: black-oxide steel boss, plain blind hole.- Execution B: brass boss, plain or tapped blind hole. E+G VL.155 p Lobe knob Elesa+Ganter VL.155 p lobe knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ). E+G VL.640 FP Lobe knob Elesa+Ganter VL.640 FP Lobe knobMaterial: glass reinforced polyamide based (PA) technopolymer.Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Standard executions:VL.640 FP-A: black-oxide steel hub available in different executions:- not drilled.- H7 reamed pass-through hole.- 6H threaded pass-through hole.VL.640 FP-B: brass hub, not drilled. E+G VH.153 Lobe knob Elesa+Ganter VH.153 lobe knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly- Execution A: black-oxide steel boss, plain blind hole.- Execution B: brass boss, plain or tapped blind hole. E+G VH.153 p lobe knob Elesa+Ganter VH.153 p Lobe knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ). E+G VTR Lock knob Elesa+Ganter VTR. Lock knobsMaterial: Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, orange, glossy finish.Plate: Matte anodised aluminium.Assembly: Brass boss, tapped blind hole. E+G VTR.p Lock knob Elesa+Ganter VTR.p Lock knob with threadMaterial: Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Plate: Matte anodised aluminium.Assembly: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ). E+G VTR.N Lock knob Elesa+Ganter VTR.N Lock knobMaterial: Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Square hole. E+G VTR.FP Lock knob Elesa+Ganter VTR.FP Lock knobMaterial: Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Brass boss, tapped through hole. E+G GN 5339.5 st. steel Elesa+Ganter GN 5339.5 Lock knob in stainless steelMaterial: AISI 303 stainless steel.Standardversion - MT: sandblasted matte finish.- PL: polished.Assembly- Type E: hub, tapped blind hole, highly polished.- Type D: hub, tapped through hole, highly polished.- Type C: hub, H7 reamed blind hole. E+G GN 420 Steel Elesa+Ganter GN 420 Knurled nutMaterial: Technopolymer (Polyamide PA), black, shiny finishBush: Steel zinc plated, blue passivated E+G GN 420-NI st. steel Elesa+Ganter GN 420-NI Knurled nutPlastic: Technopolymer (Polyamide PA) black, shiny finishBush: Stainless Steel AISI 303 E+G GN 421 knurled screw Elesa+Ganter GN 421 knurled screwMaterial: Technopolymer (Polyamide PA)black, shiny finishThreaded bolt: Steel zinc plated, blue passivated E+G GN 421-NI knurled screw st.st. Elesa+Ganter GN 421-NI knurled screwMaterial: Technopolymer (Polyamide PA)black, shiny finishThreaded bolt: Stainless Steel AISI 304 E+G BT Fluted grip knob Elesa+Ganter BT. Fluted grip knobMaterial: Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard execution: Brass boss, threaded blind hole. E+G BT.p Fluted grip knob Elesa+Ganter BT.p Fluted grip knobMaterial: Polyamide based (PA) technopolymer. Resistant to solvents, olis, greases and other chemical agents.Colour: Black, matte finish.Assembly: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data). E+G BT.FP Fluted grip knob Elesa+Ganter BT.FP Fluted grip knobMaterial: Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: Brass boss, tapped through hole. E+G MBT. Knurled knob color Elesa+Ganter MBT. Color Diamond cut knurled knobMaterial: High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents. With coloured centre capTechnopolymer, matte finish.Colour: Black, matte finish.Brass boss, plain or threaded blind hole.To order, add the index of the desired colour (C9, ..., C6) to the code and the description.On request and for sufficient quantities, it can be supplied in other colours or with customised graphic symb .... E+G MBT.p Diamond cut knurled knob Elesa+Ganter MBT.p Color Diamond cut knurled knob with coloured centre capMaterial: High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Coloured centre cap: Technopolymer, matte finish.To order, add the index of the desired colour (C9, ..., C6) to the code and the description.On request and for sufficient quantities, it can be supplied in other colours or with customised graphic symbols, marks or writi .... E+G MBT-p-SOFT Fluted grip knob Elesa+Ganter MBT.p SOFT Fluted grip knobMaterial: High resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Fluted rim: "Soft-touch" thermoplastic elastomer (TPE) chemically bonded, hardness 70 Shore A.Colour: Black, matte finish.Standard execution: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data). E+G MBT-SOFT Fluted grip knob Elesa+Ganter MBT.SOFT Fluted grip knobMaterial: High-resilience polypropylene based (PP) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Fluted rim: "Soft-touch" thermoplastic elastomer (TPE) chemically bonded, hardness 70 Shore A. The coating material is certified according to FDA (U.S. Food and Drug administration).Colour: Black, matte finish.Standard execution: Brass boss, threaded blind hole. E+G BT-SST Fluted grip knob Elesa+Ganter BT-SST Fluted grip knobMaterial: Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: AISI 303 stainless steel boss, tapped blind hole. E+G BT.SST-p Fluted grip knob Elesa+Ganter BT-SST-p Fluted grip knobMaterial: Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: AISI 303 stainless steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Techincal Data). E+G BT.FP-ESD Fluted grip knob Elesa+Ganter BT.FP-ESD Fluted grip knobMaterial: Polyamide based (PA) special antistatic technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: Brass boss, tapped through hole. E+G BT-ESD Fluted grip knob Elesa+Ganter BT-ESD Fluted grip knobMaterial: Polyamide based (PA) special antistatic technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: Brass boss, tapped blind hole. E+G BT.p-ESD Fluted grip knob Elesa+Ganter BT.p-ESD Fluted grip knobMaterial: Polyamide based (PA) special antistatic technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data). E+G B.193 FP Knurled grip knob Elesa+Ganter B.193 FP Knurled grip knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Brass boss, tapped through hole. E+G B.193 Knurled grip knob Elesa+Ganter B.193 Knurled grip knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Standard execution: Brass boss, tapped blind hole. E+G B.193 p Knurled grip knob Elesa+Ganter B.193 p Knurled grip knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data). E+G B.193-SST Knurled knob Elesa+Ganter B.193-SST Knurled grip knobMaterial:Knob: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents. Colour:Black, glossy finish. Standard execution: AISI 303 stainless steel boss, tapped blind hole. E+G B.193-SST-p knurled grip knob Elesa+Ganter B.193-SST-p knurled grip knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: AISI 303 stainless steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ). E+G B.259 Knurled grip knob Elesa+Ganter B.259 knurled grip knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Brass boss, tapped blind hole. E+G B.259 p Knurled grip knob Elesa+Ganter B.259 p knurled grip knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ). E+G B.259-CLEAN Knurled knob Elesa+Ganter B.259-CLEAN knurled grip knobMaterial: Painted phenolic based (PF) Duroplast.Colour: White similar to RAL 9002, glossy finish.Assembly: AISI 303 stainless steel boss, tapped blind hole. E+G B.220 Knurled grip knob Elesa+Ganter B.220 Knurled grip knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, glossy finish.Assembly: Black-oxide steel hub, plain blind hole. E+G DIN 6303 Steel Elesa+Ganter DIN 6303 knurled grip knobMaterial: Black-oxide steel.Assembly: Tapped through hole (execution A).Tapped through hole with semi-machined threaded hole (execution B). E+G DIN 6303 st. steel Elesa+Ganter DIN 6303-NI knurled grip knobMaterial: AISI 303 stainless steel, sandblasted matte finish.AssemblyTapped through hole (execution A).Tapped through hole with semi-machined threaded hole (execution B). E+G DIN 464 Steel Elesa+Ganter DIN 464 knurled grip knob with threaded pinMaterial: Turned black-oxide steel.Assembly: Threaded pin. E+G DIN 464 st. steel Elesa+Ganter DIN 464-NI knurled grip knob with threaded pinMaterial: AISI 303 stainless steel, sandblasted matte finish.Assembly: Threaded pin. E+G DIN 466 Steel Elesa+Ganter DIN 466 knurled grip knobMaterial: Turned black-oxide steel.Assembly: Hub, tapped through hole. E+G DIN 466 st. steel Elesa+Ganter DIN 466-NI knurled grip knob in stainless steelMaterial: AISI 303 stainless steel, sandblasted matte finish.Assembly: Hub, tapped through hole. E+G DIN 653 Steel Elesa+Ganter DIN 653 knurled grip knobs with threaded pin.Material: Turned black-oxide steel.Assembly: Threaded pin. E+G DIN 653 st. steel Elesa+Ganter DIN 653 knurled grip knob with threaded pinMaterial: AISI 303 stainless steel, sandblasted matte finish.Assembly: Threaded pin. E+G GN 653.2 Knurled screw Elesa+Ganter GN 653.2 Knurled screwKnurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.Specification version ST:Made from steel- Tensile strength class 5 (500N/mm2)- visible face fine turned- black oxide finish E+G DIN 467 Steel Elesa+Ganter DIN 467 knurled grip knobMaterial: Turned black-oxide steel.Assembly: Tapped through hole. E+G DIN 467 st. steel Elesa+Ganter DIN 467 knurled grip knobMaterial: AISI 303 stainless steel, sandblasted matte finish.Assembly: Tapped through hole. E+G MCT Fluted grib knob Elesa+Ganter MCT. fluted grip knobMaterial: Polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Closing cap: Polypropylene based (PP) technopolymer, orange or black colour, glossy finish with matte central surface, snap-in mounting.Standard execution: Assembly by means of hexagon head screws or standard lock nuts (not supplied) to put in place inside the knob by pressing. E+G EWN.FP Wing nut Elesa+Ganter EWN.FP wing nutMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Grey-black, matte finish.Assembly: brass boss, tapped through hole, without cap. E+G EWN Wing nut Elesa+Ganter EWN. wing nutMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Grey-black, matte finish.Assembly: brass boss, tapped through hole, with cap.Cap for EWN.: Technopolymer in Ergostyle colours, matte finish; supplied assembled, press-fit assembly, removable by a screwdriver.Available also as accessory sold separately (see caps table).Cap colours:C1: Black RAL 7021C2: Orange RAL2004C3: Grey RAL7035C .... E+G EWN.p Wing screw Elesa+Ganter EWN.p wing screwMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Grey-black, matte finish.Assembly: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data ).Cap: Technopolymer in Ergostyle colours, matte finish; supplied assembled, press-fit assembly, removable by a screwdriver.Available also as accessory sold separately (see caps table).Cap col .... E+G EWN.SST-FP Wing nut Elesa+Ganter EWN.SST-FP wing nutMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Grey-black, matte finish.Assembly: AISI 303 stainless steel boss, tapped through hole, without cap. E+G EWN.SST Wing nut Elesa+Ganter EWN.SST wing nut with capMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Grey-black, matte finish.Assembly: AISI 303 stainless steel boss, tapped through hole, with cap.Cap for EWN.SST: Technopolymer in Ergostyle colours, matte finish; supplied assembled, press-fit assembly, removable by a screwdriver.Available also as accessory sold separately (see caps table).Cap colours:C1: Black RAL 7021C .... E+G EWN.SST-p Wing screw Elesa+Ganter EWN.SST-p wing screwMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Grey-black, matte finish.Cap: Technopolymer in Ergostyle colours, matte finish; supplied assembled, press-fit assembly, removable by a screwdriver.Available also as accessory sold separately (see caps table).Standard execution: AISI 303 stainless steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Tec .... E+G ESN Single wing nut Elesa+Ganter ESN. Single wing nut with coloured capMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Grey-black, matte finish.Assembly: Brass boss, tapped through hole.Cap: Technopolymer in Ergostyle colours, matte finish; supplied assembled, press-fit assembly, removable by a screwdriver.Available also as accessory sold separately (see caps table).Cap colours:C1: Black RAL 7021C2: Orange RAL2004C3: Grey RA .... E+G CWN.FP Wing nut Elesa+Ganter CWN.FP Wing nutMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: Brass boss, tapped through hole. E+G VWN Wing nut Elesa+Ganter CWN. Wing nutMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: Brass boss, tapped blind hole. E+G CWN.p Wing nut Elesa+Ganter CWN.p wing nutMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical Data). E+G GN 734 st. steel Elesa+Ganter GN 731 Wing nutMaterial: Stainless steel with sand-blasted finish.Mounting hole:- Type E: tapped blind hole.- Type D: tapped through hole. E+G GN 431 st. steel Elesa+Ganter GN 431 Wing knobMaterial: AISI 316L sintered stainless steel, sandblasted matte finish.Assembly: AISI 304 stainless steel threaded pin, screwed and set in the body with a lock pin. E+G GN 432 st. steel Elesa+Ganter GN 432 Wing knobMaterial: AISI 316L sintered stainless steel, sandblasted matte finish.Assembly: Tapped blind hole. E+G CT.476 FP Wing knob Elesa+Ganter CT.476 FP wing knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard execution: Brass boss, threaded pass-through hole. E+G CT.476 Wing knob Elesa+Ganter CT.476 wing knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard execution: Brass boss, threaded blind hole. E+G CT.476 p Wing knob Elesa+Ganter CT.476 p wing knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard execution: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947. E+G CT.476 SST-p Wing knob Elesa+Ganter CT.476-SST-p wing knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Assembly: AISI 303 stainless steel threaded stud, chamfered flat end according to UNI 947. E+G CTL.476 wing knobs Elesa+Ganter CTL.476 wing knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard execution: Brass boss, threaded blind hole. E+G CTL.476 p wing knobs Elesa+Ganter CTL.476 p Wing knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.Colour: Black, matte finish.Standard execution: Zinc-plated steel threaded stud, chamfered flat end according to UNI 947. E+G GN 433 St. Steel wing knobs Elesa+Ganter GN 433 wing knob in stainless steelMaterial: AISI CF-8 stainless steel (precision casting), sandblasted matte finish.Assembly: Threaded pin. E+G GN 434 St. Steel knops Elesa+Ganter GN 434 Wing knob in stainless steelMaterial: AISI CF-8 stainless steel (precision casting), sandblasted matte finish.Assembly: Tapped blind hole. E+G GN 7336-NI knob Elesa+Ganter GN 7336-NI Knurled knob with threaded pin.Material: Plastic, polyamide based (PA) technopolymer, glas fibre reinforced, temperature resistant up to 130 °C.Threaded pin: AISI 304 stainless steel NI.Cover cap: Light grey, matte. E+G GN 7336-NI knob Elesa+Ganter GN 7336-NI Knurled knobMaterial: Plastic, polyamide based (PA) technopolymer, glas fibre reinforced, temperature resistant up to 130 °C.Threaded bush: AISI 304 stainless steel NI.Cover cap: Light grey, matte. E+G GN 835 wing screw - st. steel Elesa+Ganter GN 835 Wing screw in stainless steelMaterial: Precision casting AISI CF-8 stainless steel, sandblasted matte finish.Assembly: Threaded pin. E+G GN 653.10 Thumb screw Elesa+Ganter GN 653.10 Flat knurled thumb screw in steel or GN 653.10-NI in stainless steelMaterial:- ST: Turned black-oxide steel, visible face fine turned.- NI: AISI 304 stainless steel, sandblasted matte finish, visible face fine turned.Assembly: Threaded pin.Pivot:- Version MS: brass.- Version KU: plastic, polyacetal (POM). E+G GN 7336.5 Knurled knob Elesa+Ganter GN 7336.5 Knurled knobMaterial: Plastic, polyamide based (PA) techno polymer, glass fiber reinforced, temperature resistant up to 130 ° C.Threaded Stud: Stainless steel AISI 304 A2. Protective shield: Light gray, matte. Standard versions available - Type MS: Brass. - Type KU: Plastic. (POM) - Type ZK: spherical tap E+G GN 5345 Three-star knob st Elesa+Ganter GN 5345 Stainless Steel-Three-star knobMaterial: AISI 303 Stainless Steel, matt-blasted.Standard versions: - Type A: casting only. - Type E: with threaded blind bore. - Type D: with threaded through bore. - Type C: with plain blind bore H7. Special execution on request. Stainless Steel-Three-star knobs GN 5345 have a smooth and sealed surface. They are particularly suitable for use where hygiene requirements are high. Their shape allows relatively high torques to be applied. E+G GN 5345.4 Three-star knob St. Elesa+Ganter GN 5345.4 Three-star knobMateriaal: AISI 316L (A4) Stainless Steel, matt-blasted.Standard versions available: - Type A: casting only. - Type E: with threaded blind bore. - Type D: with threaded through bore. - Type C: with plain blind bore H7.Special execution on request.Stainless Steel-Three-star knobs GN 5345.4 have a smooth and sealed surface. They are particularly suitable for use where hygiene requirements are high. Their shape allows relatively high torques to be applied. E+G VC.692-SST-p-P Lobe knob Elesa-Ganter VC.692-SST-p-P Lobe knob with boltMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish.Standard executions: -VC.692-SST-p-PO: AISI 303 stainless steel threaded stud, chamfered end with acetal resin (POM) bolt. -VC.692-SST-p-PB: AISI 303 stainless steel threaded stud, chamfered end with brass bolt. E+G DIN 6335-NI St. steel star knob Elesa-Ganter DIN 6335-NI Stainless steel star knobMaterial: AISI CF-8 stainless steel, sandblasted matte finsih. Assembly: - Type A: casting only (unmachined). - Type D: with threaded through bore. - Type E: with threaded blind bore. E+G VCTS-Z lobe knobs Elesa-Ganter VCTS-Z lobe knobKnob: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Built-in zinc alloy toothed insert for coupling to the metal clamping element. Colour: Black, matte finish. Centre cap: Black technopolymer centre cap. On request and for sufficient quantities, it can be supplied in yellow RAL 1021 (safety) or in other colours, with customised graphic symbols, marks or writings. Clamping element: Black-oxid .... E+G VCTS-Z-p lobe knobs Elesa-Ganter VCTS-Z-p Adjustable lobe knob with push actionKnob: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Built-in zinc alloy toothed insert for coupling to the metal clamping element. Colour: Black, matte finish. Centre cap: Black technopolymer centre cap. On request and for sufficient quantities, it can be supplied in yellow RAL 1021 (safety) or in other colours, with customised graphic symbols, marks or writings .... E+G VCTS-Z-SST lobe knobs Elesa-Ganter VCTS-SST Adjustable lobe knob with push actionKnob: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Built-in zinc alloy toothed insert for coupling to the metal clamping element. Colour: Black, matte finish. Centre cap: Black technopolymer centre cap. On request and for sufficient quantities, it can be supplied in yellow RAL 1021 (safety) or in other colours, with customised graphic symbols, marks or writings .... E+G VCTS-Z-SST-p lobe knobs Elesa-Ganter VCTS-Z-SST-p Adjustable lobe knob with push actionKnob: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Built-in zinc alloy toothed insert for coupling to the metal clamping element. Colour: Black, matte finish. Centre cap: Black technopolymer centre cap. On request and for sufficient quantities, it can be supplied in yellow RAL 1021 (safety) or in other colours, with customised graphic symbols, marks or writ .... E+G VCRT.FP Lobe knob Elesa-Ganter VCRT.FP Lobe knob with threaded pass-through hole.Material: Glass fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, matte finish. Standard execution: Brass boss, threaded pass-through hole. E+G VCR.372 Lobe knob Elesa-Ganter VCR.372 lobe knobMaterial: Phenolic based (PF) Duroplast. Resistant to solvents, oils, greases and other chemical agents. Colour: Black, glossy finish. Assembly: Square through hole with brass reinforcement. E+G GN 535 knurled screw st.steel Elesa-Ganter GN 535 knurled screw in stainless steelMaterial: AISI 304 stainless steel. - Version MT: matt blasted. - Version PL: polished. Assembly: Threaded pin. E+G GN 536 knurled nuts st.steel Elesa-Ganter GN 536 knurled nutMaterial: AISI 304 stainless steel. - Version MT: matt blasted. - Version PL: polished. Assembly: Tapped blind hole. E+G EWN.SST-p-P Wing screw Elesa-Ganter EWN-SST-p-P wing screw with boltMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents. Colour: Grey-black, matte finish. Cap: Technopolymer in Ergostyle colours, matte finish; supplied assembled, press-fit assembly, removable by a screwdriver. Available also as accessory sold separately (see table).Standard executions: -EWN-SST-p-PO: AISI 303 stainless steel threaded stud, chamfered end with acetal resin ( .... E+G EWNM-SST Wing screw Elesa-Ganter EWNM-SST wing screw in stainless steelMaterial: AISI 304 stainless steel, sandblasted matte finish.Standard executions: - EWNM-SST: threaded blind hole. - EWNM-SST-FP: threaded pass-through hole. - EWNM-SST-p: threaded pin. E+G GN 843 Wing nut st.steel Elesa-Ganter GN 834 wing nut in stainless steelMaterial: Precision casting AISI CF-8 stainless steel, sandblasted matte finish.Standard executions: - Type D: tapped through hole. - Type E: tapped blind hole. E+G GN 7336 st. steel INT. Elesa-Ganter GN 7336 Knurled knob in stainless steel with bore.Material: Plastic, polyamide based (PA) technopolymer, glas fibre reinforced, temperature resistant up to 130 °C. Threaded bush: AISI 304 stainless steeI. Cover cap in light grey plastic. E+G GN 7336 st. steel pin Elesa-Ganter GN 7336 Knurled knob in stainless steel with treaded pin.Material. Plastic, polyamide based (PA) technopolymer, glas fibre reinforced, temperature resistant up to 130 °C. Threaded pin: AISI 304 stainless steel NI. Cover cap: Light grey, matte. E+G GN 6335 Star knob Stainless Steel-Hand knobs GN 6335 satisfy the dimensions of the but differ in terms of their non-scooping geometry, which makes cleaning easier and helps prevent possible build-up of dirt.They are suitable for areas with special hygiene requirements and, thanks to the material used, for applications in highly corrosive environments.Types:- Type D: with threaded through bore- Type E: with threaded blind bore- Stainless Steel precision casting A4Material:- Stainless steel AISI 316, polished PL E+G GN 6335.5 Star knobs Elesa-Ganter GN 6335.5 Star knobThreaded bolt: AISI 303 stainless steel.Standard versions available:- Version AM: Star knob DIN 6335 Aluminium (AL), matt (ground).- Version AP: Star knob DIN 6335 Aluminium (AL), polished.Assembly: The threaded bolt is screwed in and secured by a crossdowel. E+G GN 6335.5-ES star knob Elesa-Ganter GN 6335.5-ES star knobStar knob: AISI CF-8 stainless steel ES, sandblasted matte finish. Threaded bolt: AISI 303 stainless steel. Assembly: The threaded bolt is screwed in and secured by a crossdowel. E+G GN 6336.5 Lobe knob Elesa-Ganter GN 6336.5 lobe knob with threaded bolt in stainless steelThreaded bolt: AISI 303 stainless steel.Standard versions available:- Version AM: Star knob DIN 6335 Aluminium (AL), matt (ground).- Version AP: Star knob DIN 6335 Aluminium (AL), polished.Assembly: The threaded bolt is screwed in and secured by a crossdowel. E+G GN 6336.5-ES Lobe knob Elesa-Ganter GN 6336.5-ES Lobe knobStar knob: AISI CF-8 stainless steel ES, sandblasted matte finish. Threaded bolt: AISI 303 stainless steel. Assembly: The threaded bolt is screwed in and secured by a crossdowel. E+G GN 6335.4-SG star knobs Elesa-Ganter GN 6335.4-SG Star knobStar knob: Cast iron. Threaded bolt: Blackened.Assembly: The threaded bolt is screwed in and secured by a crossdowel. E+G GN 6336.4-SG Star knob Elesa-Ganter GN 6336.4-SG Star knobMaterial: Cast iron. Threaded bolt: Blackened.Assembly: The threaded bolt is screwed in and secured by a crossdowel. E+G GN 5334.4 Star knob Elesa-Ganter GN 5334.4 Stanless steel star knobMaterial: AISI 316L (A4) stainless steel, hub welded, matt shot-blasted.Standard versions available: - Type E: with threaded blind bore. - Type C: with blind bore H7. E+G GN 5334.4 St. steel thread Elesa-Ganter GN 5334.4 Stainless steel star knob with threadMaterial: AISI 316L (A4) stainless steel, hub welded, matt shot-blasted. E+G GN 5335.4 lobe knobs Elesa-Ganter GN 5335.4 Lobe knob in stainless steelTypes: - Type A: without bore - Type E: with threaded blind bore - Type D: with threaded through bore - Type C: with plain blind bore H7 Material: Stainless Steel AISI 316L (A4), matt shot-blasted E+G GN 653.2-NI Knurled screw Elesa+Ganter GN 653.2-NI Knurled screwMade from Stainless Steel NI, AISI 303- visible face fine turned- matt shot-blasted E+G VTT lobe knob Elesa-Ganter VTT lobe knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish.Standard executions - VTT:ﾠ brass boss, threaded blind hole. - VTT-SST:ﾠ AISI 304 stainless steel boss, threaded blind hole. - VTT-p: ﾠzinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 - VTT-SST-p: AISI 304 stainless steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 E+G VTT-CLEAN Lobe knob Elesa-Ganter VTT-CLEAN Lobe knobMaterial: Glass-fibre reinforced polyamide based (PA) technopolymer, white colour similar to RAL 9002, matte finish.Standard executions: - VTT-CLEAN: AISI 304 stainless steel boss, threaded blind hole. - VTT-p-CLEAN: AISI 304 stainless steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 E+G VTT-SST-VD Lobe knob E+G VTT-SST-VD Lobe knob in visually detectable technopolymerGlass-fibre reinforced polyamide based (PA) technopolymer, RAL 5001 blue colour, matte finish.Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).The RAL 5005 blue colour is easily visible in case of accidental food contamination.This makes it suitable for applications in the food and pharmaceutical industries.Also available in metal detectable version MD E+G VTT-SST-MD Lobe knob Glass-fibre reinforced polyamide based (PA) technopolymer, RAL 5001 blue colour, matte finish.Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).The special technopolymer contains additives detectable by means of metal detectors.Built-in zinc alloy toothed insert for coupling to the metal clamping element.The RAL 5001 blue colour is easily visible in case of accidental food contamination. Furthermore the material additives are metal detectable at a cubic particle size of 5 mm p .... E+G VTT-SST-SAN lobe knob E+G VTT-SST-SAN lobe knob in technopolymer with antibacterial protection.Glass-fibre reinforced polyamide based (PA) with silver ion additive on an inorganic base, RAL 7021 grey-black colour (C1) or RAL 9016 white (C16), matte finish.AISI 304 stainless steel boss, threaded blind hole.The special antibacterial additive prevents bacteria on the product surface.The controlled release mechanism of the silver ions keeps the antibacterial characteristics unchanged over time, even after several washing .... E+G EWN-SST-SAN wing nut Glass-fibre reinforced polyamide based (PA) with silver ion additive on an inorganic base, RAL 7021 grey-black colour (C1) or RAL 9016 white (C16), matte finish.The special antibacterial additive prevents bacteria on the product surface. The controlled release mechanism of the silver ions keeps the antibacterial characteristics unchanged over time, even after several washing cycles. Furthermore the material additives are metal detectable at a cubic particle size of 5mm per side. The high tempera .... E+G GN 5334.13 star knob E+G EWN-LP wing nut E+G EWN-LP wing nut with retaining chain.The elastic fork, housed in the groove of the wing nut can turn freely. The coiled ring connects the fork to the chain. Suitable where it is necessary to prevent the loss of the wing nut. For applications in which the fixing of the chain is at a position higher than that of the wing nut, it is advisable to leave it with slack movement to prevent the ring from touching the wing nut.Material:Wing nut in glass-fibre reinforced polyamide based (PA) technopoly .... E+G GN VB.839 three-arm knob Elesa+Ganter GN VB.839 three-arm-knob with coloured centre cap.The three-arm shape is particularly ergonomic, ensuring an excellent grip. Winner of the Red Dot award 2019.Material:- Glass-fibre reinforced polyamide based (PA) technopolymer, polyamide based (PA) technopolymer coating, chemically bonded with semi-glossy finish, black colour.- Coloured centre cap in Polyamide based (PA) technopolymer, in the standard colours, semi-glossy finish.Standard executions:- VB.839-B: brass boss, threaded b .... E+G GN VB.839 SOFT three-arm knob Elesa+Ganter VB.839 SOFT soft-touch three-arm knob with coloured centre capThe soft coating makes it more comfortable to use even in the presence of humidity and is particularly useful in the case of prolonged use or in the presence of disabilities as well as allowing greater tightening torque. The three-arm shape is particularly ergonomic. The product design associated with the soft coating gives the machinery to which it is applied an air of quality and refinement. Red Dot award winner 2019.Ma .... E+G VTT-HL star knob Elesa+Ganter VTT-HL star knob with hexagonal shank allows the handwheel to be tightened with a spanner. The three-lobe shape with large recesses is particularly ergonomic also for smaller knobs, ensuring an effective grip even with work gloves. The full section design without rear cavities prevents the deposit of unsanitary residues, ensuring maximum cleanability and making the product particularly suitable for applications on machines and equipment subject to frequent cleaning with water or ste .... E+G BTL grip knob Elesa+Ganter BTL grip knob.Material:Polyamide based (PA) technopolymer, black colour, matte finish.Standard executions:- BTL-B: brass boss, threaded blind hole.- BTL-p: zinc-plated steel threaded stud, chamfered flat end according to UNI 947 : ISO 4753 (see Technical data). E+G BT-SST-p-SV Fluted grip knob Elesa+Ganter BT-SST-p-SV fluted grip knob.The BT-SST-p-SV knobs allow the locking of a component avoiding, thanks to the thrust pad, direct contact of the stud with the surface to be locked. The metal insert in AISI 303 stainless steel can be used in sectors where corrosion resistant materials are required.Material:- Polyamide-based (PA) technopolymer knob, black colour, matte finish.- AISI 303 stainless steel threaded stud, spherical end.- Acetal resin based (POM) technopolymer thrust pad, blac .... E+G BT-AV Fluted grip knobs Elesa+Ganter BT-AV fluted grip knob. The slot in the upper part of the knob is an ideal support when you have to tighten with a 6.5 mm flat-blade screwdriver. E+G GN 6336 Star knob Elesa+Ganter Stainless Steel-Star knobs GN 6336 satisfy the dimensions of the DIN 6336 but differ in terms of their non-scooping geometry, which makes cleaning easier and helps prevent possible build-up of dirt.They are suitable for areas with special hygiene requirements and, thanks to the material used, for applications in highly corrosive environments.Types: - Type D: with threaded through bore - Type E: with threaded blind boreMaterial:Stainless Steel precision casting A4, AISI 316, polish .... E+G VC.692-SST-p-SV Lobe knob Elesa+Ganter VC.692-SST-p-SV lobe knobThe VC.692-SST-p-SV knobs allow the locking of a component avoiding, thanks to the thrust pad, direct contact of the stud with the surface to be locked. The metal insert in AISI 303 stainless steel can be used in sectors where corrosion resistant materials are required.Material:– Polyamide-based (PA) technopolymer knob, black colour, matte finish.– AISI 303 stainless steel threaded stud, spherical end.– Acetal resin based (POM) technopolymer thrust pad .... E+G GN 8340 wing nut SST E+G GN 8340 is stainless steel wing nuts that clamp and fasten parts easily without tools. E+G Gn 8341 wingnut E+G GN 8341 is a wingnut in stainless steel AISI316 from Elesa+Ganters Hygenic Design series.Wing nuts GN 8341 are intended for use in hygienic areas. The sealed mounting surface enables mounting without dead spaces; the impervious geometry in combination with the high quality finish prevents the accumulation of dirt and facilitates cleaning. Wing nuts clamp and fasten parts easily without tools. The ergonomic shape allows for high tightening forces.The wing nuts can also be used in particularly ....
