E+G Clamping levers E+G Clamping levers steel E+G fixed handles and clamping levers. E+G DIN 6337 Clamping lever Elesa+Ganter DIN 6337 Clamping leversLever bodyTurned and black-oxide steel.Assembly- Type K: plain through hole with straight arm.- Type L: plain through hole with inclined arm by a 20° angle.- Type M: tapped through hole with straight arm.- Type N: tapped through hole with inclined arm by a 20° angle.BallPhenolic based (PF) Duroplast, black colour, glossy finish type DIN 319. Resistant to solvents, oils, greases and other chemicalagents. E+G GN 99.5 clamp nut Elesa+Ganter GN 99.5 Clamping leversMaterialZinc-plated steel, blue passivated.AssemblyTapped through hole. E+G GN 99.6 clamp nut Elesa+Ganter GN 99.6 Clamping leversMaterial- AISI 304 stainless steel, sandblasted matte finish. The lever arm is butt-welded to the hub.- AISI 316L stainless steel, matte shot-blasted.AssemblyTapped through hole. E+G GN 99.7 clamp nut Elesa+Ganter GN 99.7 Clamping nuts with double leverMaterialZinc-plated steel, blue passivated. The two lever arms are butt-welded to the hub.AssemblyTapped through hole. E+G GN 99.8 clamp nut Elesa+Ganter GN 99.8 Clamping nuts with double leverMaterialAISI 304 stainless steel, sandblasted matte finish. The two lever arms are butt-welded to the hub.AssemblyTapped through hole. E+G GN 206 clamp nut Elesa+Ganter GN 206 Clamping leversMaterialMalleable cast iron, smooth finish, paintable.AssemblyTapped through hole. E+G GN 206.1 clamp nut Elesa+Ganter GN 206.1 Clamping nuts with double leverMaterialMalleable cast iron (GT / GS) fettled and tumbled.AssemblyTapped through hole. E+G GN 204 short clamping lever Elesa+Ganter GN 204 Short clamping leversMaterialTurned and blackened steel.Standard versions available- Type N: Angled lever with threaded bore.- Type L: Angled lever with plain bore H7. E+G GN 212 tension lever Elesa+Ganter GN 212 Handle leversLever bodyBlack-oxide turned ground steel.HandleTurned and polished black-oxide steel arm inclined by a 20° angle with DIN 319 black phenolic based (PF) Duroplast ballknob.Assembly- Version C: hub with standard H7 tolerance plain blind hole.- Version E: with tapped hole.For fixing GN 212 on shafts by a grub screw see Technical Data. E+G GN 212-NI tension lever Elesa+Ganter GN 212-NI Handle leversLever bodyMatte shot-blasted AISI 303 stainless steel.HandleMatte shot-blasted AISI 303 stainless steel arm inclined by a 20° angle with DIN 319 black phenolic based (PF) Duroplast ballknob.AssemblyHub with tapped blind hole.For fixing GN 212 on shafts by a grub screw see Technical Data. E+G GN 206-NI clamping handle Elesa+Ganter GN 206-NI Clamping leverMaterial AISI CF-8 stainless steel, fine-casting, shot blasted. Contact faces machined. Assembly: Tapped through hole. E+G GN 206.1-NI clamp nut Elesa+Ganter GN 206.1-NI Clamping handleMaterial: AISI CF-8 stainless steel, fine-casting, shot blasted. Contact faces machined. Assembly: Tapped through hole. E+G DIN 99 clamping lever Elesa+Ganter DIN 99 Clamping leversMaterialTurned and black-oxide steel.Assembly- Type K: plain through hole with straight arm (only for R=50 to 160).- Type L: plain through hole with inclined arm by a 20° angle.- Type M: tapped through hole with straight arm (only for R=50 to 160).- Type N: tapped through hole with inclined arm by a 20° angle. E+G DIN 99-NI lever handle Elesa+Ganter DIN 99-NI Clamping leversMaterialAISI 303 stainless steel, sandblasted matte finish.Assembly- Type L: plain through hole with inclined arm by a 20° angle.- Type N: tapped through hole.
